Jump to content

Blogs

RouterOS 6.41rc44 [Release candidate]

6.41rc44 changelog: *) bridge - added comment support for VLANs; *) bridge - added support for "/interface list" as a bridge port; *) crs317 - added initial support for HW offloaded MPLS forwarding; *) crs3xx - fixed 100% CPU usage after interface related changes (introduced in v6.41rc31); *) dhcpv4-client - add dynamic DHCP client for mobile clients which require it; *) fetch - accept all HTTP 2xx status codes; *) firewall - do not NAT address to 0.0.0.0 after reboot if to-address is used

Guest

Guest

RouterOS 6.41rc38 [Release candidate]

6.41rc38 changelog: *) arm - minor improvements on CPU load distribution for RB1100 series devices; *) bgp - added 32-bit private ASN support; *) lte - added Passthrough support (CLI only); *) snmp - fixed "/system license" parameters for CHR; *) upnp - add "src-address" parameter on NAT rule if it is specified on UPnP request; *) upnp - deny UPnP request if port is already used by the router; Other changes since 6.40.4: !) bridge - implemented software based vlan-aware bridges; https:

Guest

Guest

RouterOS 6.40.4 [Current]

6.40.4 changelog: *) address - show warning on IPv6 address when acquire from pool has failed; *) arp - fixed invalid static ARP entries after reboot on interfaces without IP address; *) crs1xx/2xx - fixed 1 Gbps forced mode for several SFP modules; *) crs317 - added L2MTU support; *) crs3xx - improved packet processing in slowpath; *) defconf - fixed RouterOS default configuration (introduced in v6.40.3); *) dhcp - fixed downgrade from RouterOS v6.41 or higher; *) dhcpv6 client - added I

Guest

Guest

RouterOS 6.41rc37 [Release candidate]

6.41rc37 changelog: *) bridge - initial support for "/interface list" as a bridge port (CLI only); *) fetch - accept all HTTP 2xx status codes; *) ike2 - fixed initiator DDoS cookie processing; *) ike2 - fixed responder DDoS cookie first notify type check; *) lte - fixed modem initialization after reboot; *) ntp-client - properly start NTP client after reboot if manual server IP is not configured; *) sfp - fixed OPTON module DDM information readings; *) wireless - added "etsi1" regulatory

Guest

Guest

RouterOS 6.41rc34 [Release candidate]

6.41rc34 changelog: *) crs3xx - improved packet processing in slowpath; *) defconf - fixed RouterOS default configuration (introduced in v6.40.3); *) ethernet - removed "master-port" parameter; *) log - fixed "unknown" interface name in log messages; *) lte - added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only); *) lte - do not reset modem when it is not possible to access SMS storage; *) snmp - fixed "ifHighSpeed" value of VLAN, VRRP and Bonding interfaces; *

Guest

Guest

RouterOS 6.41rc32 [Release candidate]

6.41rc32 changelog: *) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx; *) bridge - implemented software based "igmp-snooping"; *) console - do not stop "/certificate sign" process if console times out in 1 minute; *) lte - added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only); *) traceroute - improved "/tool traceroute" results processing; *) wireless - log "signal-strength" when successfully connected to AP; Other changes since 6.40.

Guest

Guest

RouterOS 6.41rc31 [Release candidate]

6.41rc31 changelog: *) crs317 - added initial support for HW offloaded MPLS forwarding; *) lte - added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only); *) lte - added Passthrough support (CLI only); *) lte - added support for ZTE ME3630 E1C with additional "/port" for GPS usage; *) lte - automatically add "/ip dhcp-client" configuration on interface; *) lte - changed default values to "add-default-route=yes", "use-peer-dns=yes" and "default-route-distance=2"; *)

Guest

Guest

RouterOS 6.41rc30 [Release candidate]

6.41rc30 changelog: *) crs317 - added L2MTU support; *) crs326 - fixed packet processing speed on switch chip if individual port link speed differs; *) crs3xx - added port ingress and egress rate limiting; *) export - fixed wireless "ssid" and "supplicant-identity" compact export; *) ppp - fixed situation when part of PPP configuration was reset to default values after reboot; *) wireless - added "allow-signal-out-of-range" option for Access List entries (CLI only); Other changes since 6.

Guest

Guest

RouterOS 6.41rc28 [Release candidate]

6.41rc28 changelog: *) console - do not stop "/certificate sign" process if console times out in 1 minute; *) crs317 - added L2MTU support; *) crs3xx - added port ingress and egress rate limiting; *) log - added "bridge" topic; *) lte - added Passthrough support (CLI only); Other changes since 6.40.3: !) bridge - general development of hw-offload bridge implementation (introduced in v6.40rc36); !) bridge - implemented software based vlan-aware bridges; https://wiki.mikrotik.com/wiki/Ma

Guest

Guest

RouterOS 6.41rc26 [Release candidate]

6.41rc26 changelog: *) chr - added KVM memory balloon support; *) chr - added suspend support; *) crs1xx/2xx - fixed 1 Gbps forced mode for several SFP modules; *) crs317 - added initial support for HW offloaded MPLS forwarding; *) dhcp - fixed unresponsive DHCP service caused by inability to read not set RAW options; *) e-mail - auto complete file name on "file" parameter (introduced in v6.40); *) eoip - made L2MTU parameter read-only; *) hotspot - fixed missing "/ip hotspot server prof

Guest

Guest

RouterOS 6.41rc23 [Release candidate]

6.41rc23 changelog: *) address - show warning on IPv6 address when acquire from pool has failed; *) bridge - fixed connectivity issues when there are multiple VLAN interfaces on bridge; *) bridge - show bridge interface local addresses in the host table; *) crs317 - added initial support for HW offloaded MPLS forwarding; *) dhcp - fixed DHCP services failing after reboot when DHCP option was used; *) dhcpv4-client - allow to use DUID for client ID; *) dhcpv6-client - require pool name to b

Guest

Guest

RouterOS 6.41rc21 [Release candidate]

6.41rc21 changelog: *) arp - properly update dynamic ARP entries after interface related changes; *) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx; *) bridge - implemented software based "igmp-snooping"; *) bridge - implemented software based MSTP; *) bridge - removed "master-port" parameter; *) ike1 - remove PH1 and PH2 when "mode-config" exchange fails; *) interface - added "/interface reset-counters" command (CLI only); *) ipsec - added DH groups 19, 20 and

Guest

Guest

RouterOS 6.40.3 [Current]

6.40.3 changelog: *) dhcpv6-server - do not release address of static binding from pool after server removal; *) export - fixed "/system routerboard" export (introduced in 6.40.1); *) export - fixed export for PoE-OUT related settings; *) ike1 - fixed initiator ID comparison to NAT-OA; *) led - fixed "on" and "off" triggers when multiple LEDs are selected; *) led - fixed RB711UA ether1 LED (introduced in v6.38rc16); *) lte - do not show USB LTE modem under "/port" menu; *) lte - fixed eth

Guest

Guest

RouterOS 6.41rc20 [Release candidate]

6.41rc20 changelog: *) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx; *) bridge - fixed "fast-forward" counters; *) bridge - implemented software based "igmp-snooping"; *) bridge - implemented software based MSTP; *) bridge - removed "master-port" parameter; *) dhcpv6 client - added IAID check in reply; *) dhcpv6-client - fixed IA check on solicit when "raoud-commit" is enabled; *) dhcpv6-server - do not release address of static binding from pool after server

Guest

Guest

RouterOS 6.41rc18 [Release candidate]

6.41rc18 changelog: *) bridge - changed "Host" and "MDB" table column order; *) ipv6 - add dynamic "/ip dns" server address from RA when RA is permitted by configuration; *) log - optimized "poe-out" logging topic logs; *) lte - added Passthrough support (CLI only); *) poe-out - fixed router reboot after "poe-out-status" changes; *) userman - fixed "limitation" and "profile-limitation" update; *) webfig - allow to open table entry even if table is not sorted by # (introduced in v6.40); *)

Guest

Guest

RouterOS 6.40.2 [Current]

6.40.2 changelog: *) dhcpv6-client - fixed IA evaluation order; *) led - fixed "modem-signal" LEDs (introduced in 6.40); *) pppoe-client - fixed wrong MRU detection over VLAN interfaces; *) rb2011 - fixed possible LCD blinking along with ethernet LED (introduced in 6.40); *) sfp - fixed invalid temperature readings when ambient temperature is below 0C; *) winbox - added certificate settings; *) winbox - added support for certificate CRL list; *) winbox - do not show LCD menu for devices w

Guest

Guest

RouterOS 6.41rc17 [Release candidate]

6.41rc17 changelog: *) bridge - fixed "R" state for bridge interfaces on x86 and CHR installations (introduced in v6.41rc12); *) capsman - added "vlan-mode=no-tag" option; *) ipsec - added DH groups 19, 20 and 21 support for phase1 and phase2 (CLI only); *) ipsec - allow to specify "remote-peer" address as DNS name; *) lcd - fixed unresponsive LCD (introduced in v6.41rc15); *) lte - added Passthrough support (CLI only); *) pppoe - fixed invalid PPPoE server or client after reboot or "inter

Guest

Guest

RouterOS 6.41rc16 [Release candidate]

6.41rc16 changelog: *) ipsec - added DH groups 19, 20 and 21 support for phase1 and phase2 (CLI only); *) lcd - fixed unresponsive LCD (introduced in 6.41rc15); *) lte - added passthrough support (CLI only); *) traffic-flow - fixed reboots when IPv6 address has been set as target address without active IPv6 package; Other changes since 6.40.1: !) bridge - implemented software based vlan-aware bridges; https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_VLAN_Filtering !) switch

Guest

Guest

RouterOS 6.41rc15 [Release candidate]

6.41rc15 changelog: *) capsman - added "vlan-mode=no-tag" option (CLI only); *) capsman - return complete CA chain when issuing new certificate; *) export - fixed "/system routerboard" export (introduced in 6.40.1); *) ike1 - fixed initiator ID comparison to NAT-OA; *) led - fixed "on" and "off" triggers when multiple LEDs are selected; *) lte - added passthrough support (CLI only); *) ospf - fixed OSPF v2 and v3 neighbor election; *) rb1100ahx4 - fixed HW acceleration fragmented packet d

Guest

Guest

RouterOS 6.41rc13 [Release candidate]

6.41rc13 changelog: *) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx (CLI only); *) bridge - implemented software based "igmp-snooping" (CLI only); *) bridge - removed "master-port" parameter (CLI only); *) certificate - fixed import of certificates with empty SKID; *) dhcp - require DHCP option name to be unique; *) dhcpv6-client - ignore unknown IA; *) hotspot - fixed missing "/ip hotspost server profile" if invalid "dns-name" was specified; *) interface - ad

Guest

Guest

RouterOS 6.41rc13 released [Release candidate]

6.41rc13 changelog: *) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx (CLI only); *) bridge - implemented software based "igmp-snooping" (CLI only); *) bridge - removed "master-port" parameter (CLI only); *) certificate - fixed import of certificates with empty SKID; *) dhcp - require DHCP option name to be unique; *) dhcpv6-client - ignore unknown IA; *) hotspot - fixed missing "/ip hotspost server profile" if invalid "dns-name" was specified; *) interface - ad

Guest

Guest

RouterOS 6.41rc11 [Release candidate]

6.41rc11 changelog: *) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx (CLI only); *) bridge - automatically turn off "fast-forward" feature if both bridge ports have "H" flag; *) export - fixed interface list export; *) ike1 - release mismatched PH2 peer IDs; *) ike2 - check identities on "initial-contact"; *) ike2 - use peer configuration address when available on empty TSi; *) interface - fixed corrupted "/interface list" configuration after upgrade; *) ipsec

Guest

Guest

RouterOS 6.41rc11 released [Release candidate]

6.41rc11 changelog: *) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx (CLI only); *) bridge - automatically turn off "fast-forward" feature if both bridge ports have "H" flag; *) export - fixed interface list export; *) ike1 - release mismatched PH2 peer IDs; *) ike2 - check identities on "initial-contact"; *) ike2 - use peer configuration address when available on empty TSi; *) interface - fixed corrupted "/interface list" configuration after upgrade; *) ipsec

Guest

Guest

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.