Jump to content
  • публикации
    7340
  • коментара
    3
  • преглеждания
    198261

Contributors to this blog

  • Влади 19

RouterOS 6.41rc13 [Release candidate]


Гост

780 прегледа

6.41rc13 changelog:

*) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx (CLI only);
*) bridge - implemented software based "igmp-snooping" (CLI only);
*) bridge - removed "master-port" parameter (CLI only);
*) certificate - fixed import of certificates with empty SKID;
*) dhcp - require DHCP option name to be unique;
*) dhcpv6-client - ignore unknown IA;
*) hotspot - fixed missing "/ip hotspost server profile" if invalid "dns-name" was specified;
*) interface - added option to join and exclude "/interface list" from one and another;
*) lte - improved FastTrack support for SXT LTE;
*) lte - added multi APN passthrough support for wAP LTE;
*) lte - do not show USB LTE modem under "/port" menu (introduced in 6.41rc);
*) lte - improved reliability of USB LTE modems;
*) lte - properly recognize USB devices under "/system resource usb" (introduced in 6.41rc12);
*) rb750gr3 - show warning and do not allow to use "protected-bootloader" feature if "factory-firmware" older than 3.34.4 version;

Other changes since 6.40.1:

!) bridge - implemented software based vlan-aware bridges;
https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_VLAN_Filtering
!) switch - "master-port" conversion into a bridge with hardware offload "hw" option (CLI only);
https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Bridge_Hardware_Offloading
!) bridge - general development of hw-offload bridge implementation (introduced in v6.40rc36);
*) arp - fixed invalid static ARP entries after reboot on interfaces without IP address;
*) bridge - automatically turn off "fast-forward" feature if both bridge ports have "H" flag;
*) bridge - fixed ARP setting (introduced in v6.40rc36);
*) bridge - fixed multicast forwarding (introduced in v6.40rc36);
*) bridge - implemented dynamic entries for active MST port overrides;
*) bridge - implemented software based MSTP (CLI only);
*) bridge - removed "frame-types" and "ingress-filtering" for bridge interfaces (introduced in v6.40rc36);
*) bridge - show "admin-mac" only if "auto-mac=no";
*) btest - improved reliability on Bandwidth Test when device`s RAM is almost full;
*) certificate - fixed SCEP "get" request URL encoding;
*) certificate - show "Expired" flag when initial CRL fetch fails;
*) CRS3xx - switch VLAN configuration integrated within bridge VLAN configuration with hw-offload;
*) dhcpv6-client - fixed IA evaluation order;
*) e-mail - do not show errors when sending e-mail from script;
*) export - fixed interface list export;
*) hotspot - improved user statistics collection process;
*) ike1 - release mismatched PH2 peer IDs;
*) ike2 - check identities on "initial-contact";
*) ike2 - use peer configuration address when available on empty TSi;
*) interface - fixed corrupted "/interface list" configuration after upgrade;
*) ippool6 - try to assign desired prefix for client if prefix is not being already used;
*) ipsec - allow to specify remote peer address as DNS name (CLI only);
*) ipsec - renamed "firewall" argument to "notrack-chain" in peer configuration;
*) ipv6 - fixed IPv6 address request from pool (introduced in 6.41rc1);
*) l2tp-server - fixed PPP services becoming unresponsive after changes on L2TP server with IPSec configuration;
*) led - fixed "modem-signal" LEDs (introduced in 6.40);
*) lte - allow to specify the MAC address for passthrough mode;
*) modem - added initial support for Alcatel IK40 and Olicard 500;
*) ppp - added support for Sierra MC7750, Verizon USB730L;
*) pppoe-client - fixed wrong auto MRU detection over VLAN interfaces;
*) pppoe-server - fixed situation when PPPoE servers become invalid on reboot;
*) rb2011 - fixed possible LCD blinking along with ethernet LED (introduced in 6.40);
*) sfp - fixed invalid temperature readings when ambient temperature is below 0C;
*) sftp - added functionality which imports ".auto.rsc" file or reboots router on ".auto.npk" upload;
*) ups - fixed duplicate "failed" UPS logs;
*) winbox - added certificate settings;
*) winbox - added support fro certificate CRL list;
*) winbox - do not show duplicate "Template" parameters for filter in IPSec policy list;
*) winbox - do not show duplicate filter parameters "Published" in ARP list;
*) winbox - fixed bridge port sorting order by interface name;
*) winbox - hide "level" and "tunnel" parameters for IPSec policy templates;
*) winbox - hide FAN speed if it is 0RPM;
*) winbox - show warnings under "/system routerboard settings" menu;
*) wireless - added "russia3" country settings;

Download the new 'RouterOS 6.41rc13' version here: https://www.mikrotik.com/download

0 Коментара


Recommended Comments

Няма коментари.

Създайте нов акаунт или се впишете, за да коментирате

За да коментирате, трябва да имате регистрация

Създайте акаунт

Присъединете се към нашата общност. Регистрацията става бързо!

Регистрация на нов акаунт

Вход

Имате акаунт? Впишете се оттук.

Вписване
×
×
  • Създай нов...

Important Information

By using this site, you agree to our Terms of Use.