Jump to content
  • публикации
    7234
  • коментар
    1
  • преглеждания
    36283

Contributors to this blog

  • Влади 19

RouterOS 6.41rc23 [Release candidate]

Гост

130 прегледа

6.41rc23 changelog:

*) address - show warning on IPv6 address when acquire from pool has failed;
*) bridge - fixed connectivity issues when there are multiple VLAN interfaces on bridge;
*) bridge - show bridge interface local addresses in the host table;
*) crs317 - added initial support for HW offloaded MPLS forwarding;
*) dhcp - fixed DHCP services failing after reboot when DHCP option was used;
*) dhcpv4-client - allow to use DUID for client ID;
*) dhcpv6-client - require pool name to be unique;
*) routerboard - fixed "/system routerboard upgrade" for CRS212-8G-4S;

Other changes since 6.40.3:

!) bridge - implemented software based vlan-aware bridges;
https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_VLAN_Filtering
!) switch - "master-port" conversion into a bridge with hardware offload "hw" option;
https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Bridge_Hardware_Offloading
!) bridge - general development of hw-offload bridge implementation (introduced in v6.40rc36);
*) arp - fixed invalid static ARP entries after reboot on interfaces without IP address;
*) arp - properly update dynamic ARP entries after interface related changes;
*) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx;
*) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx;
*) bridge - automatically turn off "fast-forward" feature if both bridge ports have "H" flag;
*) bridge - changed "Host" and "MDB" table column order;
*) bridge - fixed "fast-forward" counters;
*) bridge - fixed "R" state for bridge interfaces on x86 and CHR installations (introduced in v6.41rc12);
*) bridge - fixed ARP setting (introduced in v6.40rc36);
*) bridge - fixed multicast forwarding (introduced in v6.40rc36);
*) bridge - implemented dynamic entries for active MST port overrides;
*) bridge - implemented software based "igmp-snooping";
*) bridge - implemented software based "igmp-snooping";
*) bridge - implemented software based MSTP;
*) bridge - removed "frame-types" and "ingress-filtering" for bridge interfaces (introduced in v6.40rc36);
*) bridge - removed "master-port" parameter;
*) bridge - show "admin-mac" only if "auto-mac=no";
*) btest - improved reliability on Bandwidth Test when device`s RAM is almost full;
*) capsman - added "vlan-mode=no-tag" option;
*) capsman - return complete CA chain when issuing new certificate;
*) certificate - fixed import of certificates with empty SKID;
*) certificate - fixed SCEP "get" request URL encoding;
*) certificate - show "Expired" flag when initial CRL fetch fails;
*) CRS3xx - switch VLAN configuration integrated within bridge VLAN configuration with hw-offload;
*) dhcp - require DHCP option name to be unique;
*) dhcpv6 client - added IAID check in reply;
*) dhcpv6-client - fixed IA check on solicit when "raoud-commit" is enabled;
*) dhcpv6-client - ignore unknown IA;
*) e-mail - do not show errors when sending e-mail from script;
*) export - fixed interface list export;
*) hotspot - fixed missing "/ip hotspost server profile" if invalid "dns-name" was specified;
*) hotspot - improved user statistics collection process;
*) ike1 - release mismatched PH2 peer IDs;
*) ike1 - remove PH1 and PH2 when "mode-config" exchange fails;
*) ike2 - check identities on "initial-contact";
*) ike2 - use peer configuration address when available on empty TSi;
*) interface - added "/interface reset-counters" command (CLI only);
*) interface - added option to join and exclude "/interface list" from one and another;
*) interface - fixed corrupted "/interface list" configuration after upgrade;
*) ippool6 - try to assign desired prefix for client if prefix is not being already used;
*) ipsec - added DH groups 19, 20 and 21 support for phase1 and phase2 (CLI only);
*) ipsec - allow to specify "remote-peer" address as DNS name;
*) ipsec - kill PH1 on "mode-config" address failure;
*) ipsec - renamed "firewall" argument to "notrack-chain" in peer configuration;
*) ipv6 - add dynamic "/ip dns" server address from RA when RA is permitted by configuration;
*) ipv6 - fixed IPv6 address request from pool (introduced in 6.41rc1);
*) l2tp-server - fixed PPP services becoming unresponsive after changes on L2TP server with IPSec configuration;
*) lcd - fixed "flip-screen=yes" state after reboot;
*) lcd - fixed unresponsive LCD (introduced in v6.41rc15);
*) log - optimized "poe-out" logging topic logs;
*) lte - added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only);
*) lte - added Passthrough support (CLI only);
*) lte - added Yota non-configurable modem support;
*) lte - fixed mode initialization after reboot;
*) lte - integrated IP address acquisition without DHCP client for wAP LTE kit-US;
*) lte - properly recognize USB devices under "/system resource usb" (introduced in 6.41rc12);
*) modem - added initial support for Alcatel IK40 and Olicard 500;
*) ospf - fixed OSPF v2 and v3 neighbor election;
*) ppp - added support for Sierra MC7750, Verizon USB730L;
*) pppoe - fixed invalid PPPoE server or client after reboot or "interface" edit (introduced in v6.41rc9);
*) pppoe-server - fixed situation when PPPoE servers become invalid on reboot;
*) sfp - fixed SFP interface power monitor when bad SFP DDMI information is received;
*) sftp - added functionality which imports ".auto.rsc" file or reboots router on ".auto.npk" upload;
*) sniffer - fixed VLAN tag reporting for TX packets (introduced 6.41rc14);
*) snmp - fixed bridge host requests on devices with multiple bridge interfaces;
*) tile - improved reliability on MPLS package processing;
*) ups - fixed duplicate "failed" UPS logs;
*) winbox - added "notrack-chain" setting to IPSec peers;
*) winbox - do not show duplicate "Template" parameters for filter in IPSec policy list;
*) winbox - do not show duplicate filter parameters "Published" in ARP list;
*) winbox - fixed bridge port sorting order by interface name;
*) winbox - show warnings under "/system routerboard settings" menu;
*) wireless - pass interface MAC address in Sniffer TZSP frames;
*) wireless - updated United Kingdom regulatory domain information;

Download the new 'RouterOS 6.41rc23' version here: https://www.mikrotik.com/download



0 Коментара


Recommended Comments

Няма коментари.

Създайте нов акаунт или се впишете, за да коментирате

За да коментирате, трябва да имате регистрация

Създайте акаунт

Присъединете се към нашата общност. Регистрацията става бързо!

Регистрация на нов акаунт

Вход

Имате акаунт? Впишете се оттук.

Вписване

×

Important Information

By using this site, you agree to our Terms of Use.