https://www.mikrotik-bg.net/rss/1-%D0%BC%D0%B8%D0%BA%D1%80%D0%BE%D1%82%D0%B8%D0%BA-%D1%84%D0%BE%D1%80%D1%83%D0%BC-rss-updates.xml/News about new posts in our Mikrotik ForumenWhat's new in 7.24.2 (2026-09-03): This is an important security update. Most configurations are not at risk, but upgrading is highly recommended. To give time to update your systems, we are not currently publishing detailed information. *) bgp - fix BGP link-local nexthops unreachable over a VRF and a crash when disabling an unnumbered connection; *) btest - improve stability; *) certificate - fix changing the built-in trust store setting (introduced in 7.22.2); *) console - improve stability; *) console - fix a memory leak in background scripts; *) console - improve stability; *) container - improve container image extraction; *) dhcp - improve stability of DHCP handling; *) disk - improve stability of the SMB server; *) ethernet - improve stability on hAP be3 Media; *) fetch - improve stability of the TFTP client; *) ipv6 - add a neighbor discovery ping; *) leds - fix LEDs set to interface status staying off when the interface is active; *) lte - fix the RG650E-EU modem not bringing link up after a firmware update; *) ping - add parameter checks for arp ping; *) poe-out - fixed missing PoE-Out interface on hEX PoE lite, RB260GSP, OmniTIK 5 PoE, PowerBox; *) ssh - refactor SSH internal processes and improved system stability; *) system - improve stability; *) webfig - improve stability; *) winbox - fix the "addresses" spelling in read-only fields; *) www - improve stability; Свали от тукThu, 03 Sep 2026 10:49:49 +0000What's new in 7.24.1 (2026-Aug-21 16:06): *) app - fix entrypoint and cmd for opencloud-extended-collabora app; *) bridge - fix missing host "E" flag for CRS8xx series switches; *) bridge - fix MLAG for CRS8xx series switches; *) bridge - fix stability issue when using VRRP on bridge; *) bridge - improve MLAG host aging and deletion logic; *) console - fix "find" command argument lookup issue (introduced in v7.24); *) container - improve host isolation when container is set to "privileged=yes"; *) l3hw - fix stability issue on IPv6 offload enable; *) l3hw - fix VRF offload on bond interface remove; *) leds - fix "interface-status" trigger; *) snmp - properly validate password length when applying configuration; *) ssh - refactor SSH service internal processes; *) switch - fix possible Rx traffic stall on CPU for devices with Marvell Prestera switch chip; *) switch - fix stability issue during L2 loop for 98DX224S, 98DX226S, 98DX2528, and 98DX3236 switch chips; *) switch - fix stability issue on RB3011 (introduced in v7.22); *) system - improve handling of invalid SSL/TLS requests; *) wifi - fix stability issue for hAP be lite; *) wireguard - fix peer disable/enable state handling, which could leave the tunnel non-functional (introduced in v7.24); *) wireguard - fix private key handling, including empty private keys; *) www - improve service responsiveness when receiving malformed packets; Свали от тукMon, 24 Aug 2026 10:59:46 +0000What's new in 7.24.1 (2026-Aug-21 16:06): *) app - fix entrypoint and cmd for opencloud-extended-collabora app; *) bridge - fix missing host "E" flag for CRS8xx series switches; *) bridge - fix MLAG for CRS8xx series switches; *) bridge - fix stability issue when using VRRP on bridge; *) bridge - improve MLAG host aging and deletion logic; *) console - fix "find" command argument lookup issue (introduced in v7.24); *) container - improve host isolation when container is set to "privileged=yes"; *) l3hw - fix stability issue on IPv6 offload enable; *) l3hw - fix VRF offload on bond interface remove; *) leds - fix "interface-status" trigger; *) snmp - properly validate password length when applying configuration; *) ssh - refactor SSH service internal processes; *) switch - fix possible Rx traffic stall on CPU for devices with Marvell Prestera switch chip; *) switch - fix stability issue during L2 loop for 98DX224S, 98DX226S, 98DX2528, and 98DX3236 switch chips; *) switch - fix stability issue on RB3011 (introduced in v7.22); *) system - improve handling of invalid SSL/TLS requests; *) wifi - fix stability issue for hAP be lite; *) wireguard - fix peer disable/enable state handling, which could leave the tunnel non-functional (introduced in v7.24); *) wireguard - fix private key handling, including empty private keys; *) www - improve service responsiveness when receiving malformed packets; Свали от тукMon, 24 Aug 2026 10:59:46 +0000What's new in 7.24 (2026-Aug-14 11:33): *) adlist - improved service stability when adjusting adlist configuration; *) app - added "HF_TOKEN" env to openwebui; *) app - added "network-outgoing-access" parameter which does not allow app to make outgoing connections; *) app - added hermes-agent, inventree, opencloud, opencloud-extended apps; *) app - added PAPERLESS_SECRET_KEY env to paperless-nginx; *) app - allow "reset" even if disk not configured; *) app - allow HTTP for Gitea when "check-certificate=no"; *) app - allow setting "working_dir" in app YAML; *) app - changed pmacct-netflow YAML; *) app - disable UI in Hermes, access through /container/shell; *) app - fixed apps not updating firewall redirects when changed in YAML; *) app - fixed apps sometimes getting stuck on "waiting for layer"; *) app - make secrets sensitive to avoid polluting configuration export; *) app - removed healthcheck from opencloud-extended-collabora; *) app - reserve the app's VETH IP when stopped to eliminate IP address changes on every start/stop; *) app - show CHR's address instead of the container's; *) app - use randomly generated secrets in new apps; *) bgp - fixed EVPN label corruption and corrected EVPN type-5 output; *) bgp - improved stability when receiving malformed packets; *) bgp - removed "save-to" from "resend" command; *) bgp-vpn - fixed blackhole route export; *) bridge - added "querier-uses-bridge-address" setting to use bridge source IP address for IGMP querier; *) bridge - added DHCPv4 snooping IP binding table; *) bridge - added scheduling point during VLAN processing to prevent soft lockups when flushing FDB over large VLAN ranges; *) bridge - fixed forwarding through peer-port after disabling MLAG; *) bridge - fixed local static host entries; *) bridge - fixed MLAG MAC address handling issues related to aging, flushing and moving; *) bridge - fixed stability issue when using DHCPv4 snooping; *) bridge - fixed stuck MLAG session when using mismatched L2MTU (introduced in v7.23); *) bridge - improved bridge and port STP "priority" setting (warn when a non-compliant value is used and allow selecting a value from a list); *) bridge - improved STP, BPDU and topology change handling with MLAG, ensure dual-connected port STP state is in sync with MLAG peer; *) btest - added VRF support for bandwidth-test and speed-test; *) certificate - added "acme-renew" command; *) certificate - general improvements in certificate handling; *) certificate - use AES encryption when exporting certificates in PKCS#12 format; *) console - added "days" to scheduler; *) console - added "in" and "has" operators for array types; *) console - added "order-by" parameter to "print" command, allowing sorting by up to three arguments in ascending or descending order; *) console - added comparison operators for array type; *) console - added log tracing when scripts fail to start due to permissions; *) console - do not terminate self-removing scripts; *) console - fixed "print follow on-event" script runner command not showing all argument values in some cases; *) console - fixed argument mappings in "do" block for monitor commands; *) console - fixed proplist order in monitor commands; *) console - fixed script import/export with empty "policy" setting; *) console - fixed stability issue in full-screen editor; *) console - fixed UTF-8 comparisons on some architectures; *) console - improved "print detail" mode; *) console - improved script handling and error logging when running scripts from external sources (e.g. DHCP, SNMP, Netwatch, etc.); *) console - make "mac-auth-password" sensitive in "/ip/hotspot/profile"; *) console - make "password" sensitive in "/system/package/local-update/mirror"; *) console - produce runtime errors for bad command parameters; *) console - prompt about and offer to stop already existing serial terminal session when opening new one; *) console - renamed "address" to "available-from" in "/ip/service" (backwards compatible via deprecation); *) console - renamed "reauth-timeout" to "reauth-period" in "/interface/dot1x/server" (backwards compatible via deprecation); *) console - restrict editing comments in WiFi registration table; *) container - added "save" command to allow saving container images; *) container - added "swap-current" usage; *) container - added "swap-max" global and per-container limit; *) container - added ability to run containers in privileged mode; *) container - added initial support for RKE2; *) container - do not allow starting with empty default DNS list and no DNS override; *) container - do not print environment variables in log on container startup; *) container - fixed "start-on-boot" not retrying on certain startup errors; *) container - fixed container "devices" override to appear under "/dev"; *) container - improved layer size calculation to avoid potential loops; *) container - improved support for containers; *) container - reduced writes to flash when running health check; *) container - use env "TERM=xterm" if no TERM variable provided when running shell; *) crypto - fixed hardware accelerator for GCM cipher in TLS connection on Alpine CPUs; *) defconf - set "configuration.dtim-period=3" for WiFi; *) defconf - use "add-dns-entries=yes" on devices with DHCP server; *) dhcp - fixed processing of DHCP options that are longer than 255 bytes; *) dhcpv4-relay - fixed stability issue when creating duplicate relays; *) dhcpv4-server - do not reset "class-id" parameter when lease loses "bound" status; *) dhcpv4-server - set "ciaddr" in forcerenew messages so a relay, if used, can unicast such messages; *) dhcpv6-relay - fixed non-working relay when adding from WinBox; *) dhcpv6-server - fixed invalid flag; *) discovery - added "address6" column to default "/ip/neighbor" print view; *) discovery - added "discovery" logging topic; *) discovery - added "dying-gasp" feature for LLDP, MNDP, CDP that sends packet with "TTL=0" before graceful reboot/shutdown/upgrade; *) discovery - clear neighbor entry when receiving "dying-gasp" packet; *) discovery - improved service stability when sending discovery packets on interfaces that have hundreds of IP addresses; *) disk - added "last-seen" property that displays disk model and serial when removed; *) disk - added "raid-scrub-cancel" command; *) disk - added error message when disk state transitions from good to bad; *) disk - do not consider USB drives as self-encryption capable; *) disk - fixed "smart-info" not showing information on certain storage devices; *) disk - limited maximum swap size to be no more than 10x of device RAM; *) disk - resolved issue where storage device might change information upon reboot; *) ethernet - disable EEE on hAP be3 Media; *) ethernet - fixed stability issue for Chateau PRO ax devices; *) ethernet - fixed stability issue for devices with Alpine CPU; *) ethernet - removed "1G-baseT-half" link mode on RTL8367 switch; *) fetch - added "ip-type" parameter; *) fetch - added option to force HTTP/2 only (only for ARM64 and x86/CHR devices); *) fetch - fixed false "bad request" response when trying to fetch URL with IPv6 address in it; *) fetch - hint file list for "src-path" and "dst-path" parameters; *) hardware - renamed "max-power" to "manufacturer-reported-max-power"; *) iot - added LoRa keep alive logic for UDP protocol; *) iot - added missing LoRa US radio plans; *) iot - added Wiliot USB dongle support; *) iot - allow maximum Modbus "timeout" property to be 10 seconds; *) iot - monitor LoRa worker state (watchdog); *) iot - pass Wiliot certification; *) ip-service - remove reverse-proxy for SMIPS; *) ip-service - show service name for "l2tp"; *) ipsec - fixed expired SA handling to prevent “no such item” errors during listing; *) ipsec,ike1 - dropped base mode exchange; *) ipsec,ike1 - fixed negotiated PFS validation; *) ipsec,ike1 - improved SA, transform, fragment parsing and malformed packet validation; *) ipsec,ike2 - fixed ppk child key generation during rekey; *) ipsec,ike2 - improved KE generation validation during initial setup and child SA creation; *) ipsec,ike2 - improved PPK handling by always using it when authorized, including additional Child SAs, and moved PPK processing to the Child SA task; *) ipsec,ike2 - use first child KE selection only during IKE_AUTH exchange; *) ipsec,qkd - moved QKD to "/system/keymat-provider" menu and made it a generic key material provider; *) ipv6 - added "status" column to default "/ipv6/neighbor" print view; *) ipv6,ra - changed default "router-advertisement-route-distance" to 1; *) ipv6,ra - correctly process RAs advertising previously expired prefix; *) ipv6,ra - fixed prefix invalidation; *) ipv6,ra - use lowest value between IPv6/Pool and IPv6/ND/Prefix/Default as dynamic prefix lifetime; *) isis - fixed ECMP route removal; *) l2tp - allow fragmentation of large IPv6 packets; *) l3hw - added HW offloaded support for VLAN interfaces created directly on Ethernet for CRS8xx series switches; *) l3hw - added HW offloaded VRF support on 98DX8208, 98DX8216, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98CX8410 switches; *) l3hw - added VRF assignment via switch ACL rules for devices with Marvell Prestera switch chip; *) l3hw - allow VLAN tagged traffic inside VXLAN tunnel; *) l3hw - fixed VRF-related issues for CRS8xx series switches; *) l3hw - fixed VTEP offload on IPv4 /32 route changes; *) leds - added dark mode support for L009, hAP ax2, hAP ax3, hEX refresh, hEX S (2025), hAP ax S and Chateau ax devices; *) leds - fixed Ethernet activity LED for Chateau LTE18 ax (introduced in v7.23); *) leds - improved interface stats activity for devices with Marvell Prestera switch chip; *) lte - added force-confirmation parameter for eSIM provision command; *) lte - cap IPv6 prefix lifetime for ipv6-interface; *) lte - do not add extra /128 IPv6 address for ipv6-interface; *) lte - do not query 5G neighbor cell info until RG650E-EU FW fixed; *) lte - enabled AT registration unsolicited event reporting for EG25-G and EC25-EU boards; *) lte - fixed cases where R11l-LTE7 modem would not display correct cell info after handover; *) lte - fixed EC/IO scale in CLI and GUI; *) lte - fixed EC25-EU, EG25-G traffic to 67 UDP; *) lte - fixed IPv6 RA handling for multiapn non-primary interface; *) lte - fixed third-party modems ICCID decoding for eSIM; *) lte - improved Cinterion PLS8-E roaming; *) lte - improved deregistration handling for AT modems; *) lte - improved system stability when no APN specified; *) lte - improved USB mode handling for BG770A-GL; *) lte - limit IPv6 prefix lifetime only when lifetime is advertised as infinity; *) lte - make modem MAC persistent for R11e-LTE6 and R11l-LTE7 modems; *) lte - remove site local DNS for ipv6-interface; *) lte - removed extra restart after firmware upgrade for EC200A-EU modem; *) lte - report short cell ID in 3G network mode also for AT modems; *) lte - restrict incoming calls for FG621-EU; *) lte - show "+CME ERROR: 10" as "SIM not present"; *) lte - show "data-class" in LTE monitor instead of "access-technology" also for 5G AT modems; *) lte - show "primary-band" instead of "earfcn" in LTE monitor also for modems without CA support; *) lte - show RSCP and EC/IO parameter in 3G network mode for R11e-LTE6, R11l-LTE7 and FG621-EA modems; *) mesh - fixed missing FDB entries from wireless ports; *) mpls - added ICMP time exceeded handler for IPv6; *) mpls - make FastPath work with expl-null; *) netinstall - added Netinstall package; *) netinstall - improved architecture detection; *) netinstall-cli - added "help" parameter; *) netinstall-cli - added "reboot" and "shutdown" flags to control reboot after installation; *) netwatch - fixed an issue with DNS probe "timeout" parameter; *) netwatch - fixed HTTP GET probe over IPv6; *) netwatch - fixed inaccurate "rtt-stdev" value; *) netwatch - fixed issue where ICMP probes did not accept TTL exceeded packets when "accept-icmp-time-exceeded" was enabled; *) netwatch - increased maximum packet size to 65535; *) ospf - fixed stability issue during interface flaps; *) ospf - force passive for VRF interface; *) pimsm - make "hash-mask-length" parameter naming consistent and fixed typos; *) poe-in - added PoE-in monitoring and LLDP-based PoE negotiation support for newer devices (e.g. CRS504, CRS510, hEX S 2025, hAP be3 Media); *) poe-out - firmware update for 802.3at capable boards (the update will cause a brief power interruption to poe-out interfaces); *) poe-out - firmware update for 802.3bt capable boards (the update will cause a brief power interruption to poe-out interfaces); *) ppp - added "MT-Address-List" to IPv6 address list when received from RADIUS and using DHCP for IPv6 configuration; *) ppp - added iccid field to ppp info command for BG77 and BG770 modems; *) ppp - always show current FW version when running firmware-upgrade; *) ppp - disable/enable modem radio state depending on ppp interface state; *) ppp - fixed cases where BG77 or BG770 firmware upgrade was not available; *) ppp - fixed ppp-out stability issue; *) ppp - get IPv6 configuration via RA for modems using PPP emulation mode; *) ppp - improved "info" command for BG77 and BG770 modems; *) ppp - improved OVPN underlying SSL connection management; *) ppp - only show pin in export with "show-sensitive" flag; *) ppp - report actual network data usage statistics instead of "0" for all IPv6 RADIUS accounting parameters on accounting "Stop" packet; *) ppp - toggle radio state on interface disable/enable; *) queue - fixed "undo" command for simple queues; *) reverse-proxy - improved stability; *) rip - do not export authentication keys by default; *) route - allow to add route with link-local destination address; *) route - fixed memory leak when flapping addresses or interfaces with routing protocols running; *) route - fixed potential race condition; *) route - respect the "interface" property when pinging IPv6 addresses over ECMP; *) sfp - fixed linking for hAP ax S and hEX S (2025) with "1G-baseX" link-mode; *) sfp - removed unsupported "2.5G-baseX" speed on CRS312-4C+8XG and CRS326-4C+20G+2Q+; *) sftp - fixed branding package upload; *) sms - added some GSM7 symbols to SMS tool; *) snmp - added hotspot active-user-count and host-count OIDs to MIKROTIK-MIB; *) snmp - added missing SFP OIDs to MIKROTIK-MIB; *) snmp - added WiFi current channel "mtxrWifiInterfacesCurrentChannel" OID to MIKROTIK-MIB; *) ssh - added mlkem768x25519-sha256 key exchange support; *) ssh - do not attempt automatic empty password login when RADIUS is used; *) ssh - fixed SSH tunnel with IPv6 link-local address on non-ethernet interfaces; *) ssh - make SSH packet validation more strict; *) supout - added interface monitor-traffic; *) supout - added LTE eSIM section; *) switch - fixed IEEE reserved MAC handling for CRS1xx, CRS2xx switches; *) system - improved stability; *) system - renamed "factory-software" to "minimum-version" and "factory-firmware" to "minimum-firmware"; *) system - restrict RouterOS processes using swap; *) system - show who is using "/system serial-terminal"; *) traffic-generator - fixed injecting pcap/pcapng files on MIPSBE architecture; *) tunnel - fixed stability issue caused by a misconfigured routing loop under bridge (introduced in v7.22); *) upgrade - removed sensitive policy for "apply-changes" command; *) usb - allow overriding the power-reset duration; *) usb - fixed USB Ethernet interface default-name; *) vpls - added transmit loop detection; *) vrrp - added "v3-checksum-as-v2" setting; *) vrrp - fixed stability issue when "sync-connection-tracking" is enabled; *) vxlan - fixed missing L2MTU property when VRF is specified; *) vxlan - ignore disabled interfaces when checking for configuration conflicts; *) webfig - fixed issue with increasing keep-alive traffic; *) webfig - improved underlying encryption and stability processing; *) webfig - improvements to graphs; *) wifi - added "Preamble Puncturing" under "WiFi/Channel" menu; *) wifi - added dash when CAPsMAN generates interface name and prefix ends with digit; *) wifi - improved roaming/steering behavior for WiFi 7 MLO; *) wifi - improved stability; *) wifi - improved station-bridge mode; *) wifi - updated radio regulatory information; *) wifi - upgraded wifi-qcom driver; *) wifi-mediatek - fixed broken interfaces on startup; *) wifi-mediatek - fixed some channel definitions for certain countries; *) wifi-mediatek - improved channel switching; *) wifi-mediatek - improved stability during MLO channel switching; *) winbox - added "Network" configuration menu for WiFi; *) winbox - added "Preferred Architecture" setting for L009; *) winbox - added "SIM PIN" under "Tools/SMS"; *) winbox - fixed "Connection Bytes" field under "IP/Firewall" menu; *) winbox - fixed "EC/IO" scaling for LTE interface; *) winbox - fixed "Use Ipsec" and "Ipsec Secret" under "Interfaces/L2TP Ether" menu; *) winbox - fixed empty value in "Immediate Gateway" under "IP/Routes" menu; *) winbox - fixed sort for "Address List" under "IPv6/Firewall" menu; *) winbox - make LoRa "Auth key" and MQTT "Password" sensitive; *) winbox - move "EAP" under "Security" tab for WiFi; *) winbox - show "Any. Port" column by default under "IP/Firewall" menu; *) winbox - show preferred and valid lifetime of IPv6 address also on static IPs; *) winbox - show priority bits in "VLAN ID" field under "Tools/Packet Sniffer" menu; *) wireguard - added support for domain names in client-dns; *) wireguard - added warning when allowed-address overlaps with another peer on the same interface; *) wireguard - fixed peer recreation on interface change; *) wireguard - fixed peer Tx/Rx counters; *) wireguard - fixed wg-export comments output and case when endpoint is not set; *) wireguard - fixed whitespace handling in AllowedIPs during wg-import; *) wireguard - generate port number when specified as zero; *) wireguard - improved wg-export to print endpoint domain name; *) wireguard - improved wg-import to quietly ignore wg-quick specific keys; *) wireguard - reconfigure peer only when meaningful changes are detected; *) wireguard - reinitialize socket on VRF change; *) x86 - fixed IRQ displaying per CPU on Intel 700 series NIC; Свали от тукMon, 17 Aug 2026 11:54:07 +0000What's new in 7.23.3 (2026-Jul-30 14:17): *) certificate - added "ISRG Root X2", "Root YE" and "Root YR" to SMIPS built-in root certificate authorities store; *) certificate - added "Root YE" and "Root YR" to built-in root certificate authorities store; *) defconf - added virtual "iot-wifi" to MLO supporting devices; *) dhcpv4-server - fixed "expires-after" field for disabled static lease (introduced in v7.23); *) fastpath - properly fall back to SlowPath when FastPath is not possible due to fragmentation; *) ipsec - fixed identity lookup to skip past disabled and certificate-matched identities when scanning for an exact ID match; *) ipsec,ike2 - improved logging when remote ID is specified; *) ipsec,ike2 - use peer certificates also when identity has one set for peer matching; *) ipv6,ra - show warning about paused automatic RA on upgraded routers; *) ospf - fixed "duplicate config" issue when using ptp-unnumbered interface type; *) ptp - fixed a race condition when reading transmit timestamps, which could cause unstable clock offset under background traffic; *) ptp - fixed PTPv1 traffic forwarding when a PTPv2 profile is enabled on bridge ports; *) snmp - improved SNMPv3 request processing logic; *) system - added microSD card support for hAP be3 Media; *) system - improved handling of data re-sending on authorization requests (introduced in v7.22); *) system - improved stability; *) system - updated certificate for Windows executable signing; *) tftp - limit maximum simultaneous session count to 100; Свали от тукMon, 03 Aug 2026 07:59:43 +0000Здравейте, имам image за рутер Cisco 3725, но си е старичък, ползвам го със Switch адаптер и ми се иска някой по-ново поколение Switch, който да работи на Layer 3. Примерно 3750,3850 и т.н.Ако някой разполага с подобен image, ако може да го споделиWed, 22 Jul 2026 16:38:48 +0000търся въпросната антена mikrotik LHG XL 2Tue, 07 Jul 2026 06:43:16 +0000What's new in 7.23.2 (2026-Jul-03 12:08): !) ppp - fixed CVE-2026-59108; *) app - fixed "reset" not working with certain apps; *) app - fixed home-assistant default config files; *) app - only generate secrets for enabled apps; *) app - resolved issue where duplicate swaps are created; *) bfd - fixed delay on session print; *) bgp - added option to add BGP VPLS created interfaces in interface-list; *) bgp - fixed advertisement print handling by "dst" when destination is in VRF; *) bgp - fixed IPv6 End-of-Route processing; *) bgp - improved stability on MP (multiprotocol) parsing; *) certificate - always use all trust stores for downloaded CRL validation; *) container - fixed missing config.json issue when upgrading from version 7.20.8 or older; *) interface - fixed duplicate MAC warning for wireless, wifi, macsec, w60g interfaces (introduced in v7.23); *) ipsec - fixed policy move handling; *) ipsec,ike2 - fixed active connection termination; *) ipsec,ike2 - fixed SA payload validation; *) ipsec,ike2 - improved pending child SA cleanup and removal of dangling SAs during Phase 2 deletion; *) isis - fixed missing "l2.lsp-refresh-interval" parameter; *) leds - fixed missing wireless LED configuration (introduced in v7.21); *) lte - fixed cases where EC25-EU and EG25-G boards would receive packets with missing last 4 bytes; *) ospf - added missing "type=ptmp-broadcast" parameter to "/routing/ospf/interface" menu; *) ospf - allow comments on static interfaces; *) ospf - fixed interface passive flag update in WinBox; *) pim - added comment for "/routing/gmp" entries; *) ppp - improved system stability; *) route - fixed static route flag handling by WinBox on disable; *) routerboard - renamed "ipq53xx" firmware type to "ipq5300"; *) switch - increase "ingress-rate" and "egress-rate" maximum value to 400G; *) upgrade - prevent package scheduling from interfering with the upgrade feature; *) winbox - added missing values to "AFI" setting under "Routing/BGP" menus; *) winbox - do not pre-fill "Allowed Address" and "Client Allowed Address" with "::/0" when adding new WireGuard Peer; *) winbox - fixed value unset under "MPLS/LDP Neighbor" menu; Свали от тукMon, 06 Jul 2026 10:18:37 +0000Fri, 03 Jul 2026 19:20:33 +00002 броя Mimosa C5X само радио без антени-комплект за 160 евро Антена Mimosa N5-X16 1 брой - 15 евро Антена Ubiquiti Powerbeam 5AC 400- 70 евро Комплект линк Ubiquiti LTU Instant заедно с рефлектори от litebeam 5AC - прекарват безпроблемно 400 и отгоре MB на разтояние 3 км-цена 160 евро Антена Mikrotik LHG 5- 40 евро налични 2 броя Всичко е работещо и ъпгрейднато с последен фърмуер. тел: нула осем 9356 едно 78 осемFri, 26 Jun 2026 07:57:34 +0000Здравейте, Получихте ли новото решение на КРС за въвеждане данни за широколентов достъп в ЕИТ на МТиС ? Как мислите да въвеждате данните.Fri, 19 Jun 2026 06:02:33 +0000Здравейте на сайта на един от българските търговци пише: модулът C6x има един Gigabit Ethernet с пасивно PoE 48-56 V. В официалната брошура пише: Power • Max Power Consumption: 20 W • System Power Method: Passive PoE • PoE Power Supply: Passive POE compliant,2 4 V (PoE injector not included) кое е истина?Mon, 15 Jun 2026 20:01:36 +0000Продават се както са на снимката , без захранващ кабел POE-A4803-Z - 6.50 Euro POE-A4803А-Z-PD - 6.50 EuroThu, 11 Jun 2026 06:14:13 +0000What's new in 7.23.1 (2026-Jun-02 12:25): *) app - fixed bogus configuration export; *) app - fixed making empty directories when running configuration export; *) bgp - fixed memory leak; *) bridge - fixed stability issue when using DHCPv4 snooping; *) disk - avoid reading SCSI stats all the time to allow disks to go to sleep; *) disk - improved error message when a swap file is created without "file-size" specified; *) ethernet - fixed stability issue with TSO on Alpine CPUs; *) firewall - improved system stability; *) ipsec,ike2 - improved TSi validation to prevent modecfg address conflicts; *) ipv6 - do not disable IPv6 FastPath when Traffic Flow is enabled; *) ospf - added missing interface parameters; *) ospf - fixed unresolved route problem when "routing-table" setting is used; *) ptp - rename "smpte" to "smpte-2059"; *) route - improved overall stability; *) route - removed deprecated "/routing/route/rule" menu; *) switch - fixed rare possibility of tx-timeout or simultaneous flap of all switch ports on devices with Alpine CPUs; Свали от тукWed, 03 Jun 2026 07:49:30 +0000Здравейте, продавам 2 кашона по 305 метра лан кабел XCOM UTP CAT 5E CU 0.5MM цена за кашон 51.13 евро с ДДС.0898242357Sun, 31 May 2026 08:07:00 +0000What's new in 7.23 (2026-May-25 12:05): !) upgrade - use HTTPS by default when connecting to MikroTik upgrade servers; *) app - added "network-outgoing-access=yes/no" setting to prevent containers from initiating outbound traffic; *) app - added birdnet-go, cryptpad, diagrams-net, lorawan-stack, metube, mikrodash, nextcloud-whiteboard, paperless-ngx, wbo, zulip apps; *) app - added docker-with-dockge, docker-with-komodo, docker-with-portainer, HA-otbr-matter, odoo, otbr, stalwart, trip apps; *) app - added possibility to set app command-line parameter from CLI; *) app - added restart command; *) app - allow apps on XFS file systems; *) app - allow filtering by installed apps; *) app - allow overriding default stop signal; *) app - allow parsing DNS in YAML; *) app - allow passing stop signal from YAML and passing it to container as default; *) app - allow picking app category from drop-down; *) app - allow updating name parameter from YAML for custom apps; *) app - allow updating YAML for existing custom app, forces cleanup; *) app - apps now check for port availability, apps will not start on "internal" if app masks existing service; *) app - automatically pass any required devices to container, such as otbr; *) app - automatically restart app when required hardware device is changed; *) app - bundled ollama with openwebui; *) app - check if certificate already exists before creating a new one; *) app - disabled PiHole syncing NTP to host; *) app - fixed issue where XFS disks did not appear in the app disk drop-down; *) app - fixed saving custom apps; *) app - fixed showing ui-url for apps; *) app - fixed some apps not containing the full repository URL; *) app - fixed stability issue when running cleanup on many apps; *) app - fixed store issue when adding a custom app; *) app - fixed YAML not exported for custom apps; *) app - improved app network and port behavior; *) app - improved automatic hardware device passing to container; *) app - improved YAML error message; *) app - make sure all layer .tar.gz files are deleted after extraction finishes; *) app - on file-based devices, swap is enabled on the file itself instead of creating another and enabling it on that; *) app - stability fixes for the "/app" menu; *) app - swap file is now created based on the mount-point it is attached to; *) app - updated uptime-kuma image; *) arm64,x86 - updated Broadcom bnxt Ethernet driver for 200G support; *) bfd - fixed source address selection for IPv6 multihop sessions; *) bridge - added ability to set custom Option 82 with dhcp-agent-circuit-id, dhcp-agent-remote-id settings (replaces add-dhcp-option82 setting; configuration is automatically updated after upgrade); *) bridge - added DHCPv6 snooping feature with ability to set custom Option 18 and Option 37; *) bridge - fixed dynamic VLAN update for WiFi interfaces; *) bridge - improved MAC synchronization for MLAG; *) bridge - recognize more DHCP message types when dhcp-snooping is enabled; *) bth - fixed WireGuard client config IP address netmask; *) certificate - added "ISRG Root X1" and "DigiCert Global Root G2" to SMIPS built-in root certificate authorities store; *) certificate - allow deleting ACME certificate that failed to generate; *) certificate - improved ACME logging; *) certificate - improved ACME status reporting; *) certificate - set Let's Encrypt as default ACME directory; *) chr - improved guest tool config for arm64 CHR; *) cloud - cloud backup file management now requires "policy" policy; *) cloud - show error if cloud services are not supported on the device; *) console - added comment in "/ip/dhcp-server/option/sets" and "/ipv6/dhcp-server/option/sets" menus; *) console - added path parameter to export; *) console - added syntax highlight for script properties in some menus (e.g. dhcp-client, dhcp-server, ppp/profile, interface/vrrp); *) console - export mentions custom defconf script presence in header; *) console - fixed "/log/print follow on-event" to work with "where" (introduced in v7.22); *) console - fixed output when oversized completion present; *) console - removed redundant keepalive for the serial-terminal, ensure that the device no longer periodically outputs /0 while using "/system/serial-terminal"; *) console - show "/system/resource/hardware/usb-power-reset" only on x86; *) console - show warning in print header when terminal is too narrow to show any columns; *) console - treat non-existent command parameters as runtime errors; *) container - added restart-policy=no/always/on-failure, stop-on-unhealthy, restart-count, restart-interval, restart-max-count properties; *) container - added support for noexec option to mounts; *) container - added support for USB audio devices for containers; *) container - allow disabling individual container environment variables without deleting them; *) container - allow picking mount source directories with the file picker in WinBox; *) container - allow setting memory-max globally and per container; *) container - allow user-defined mounts overriding /sys and /dev; *) container - check if root-dir does not exist before adding a container; *) container - clean up layers of non-existing containers; *) container - detect and show containers killed by out-of-memory killer; *) container - do not allow starting container/shell with non-existing user or group; *) container - draw graphs in container stats; *) container - fixed container entrypoint and shell override by user; *) container - fixed container layer size calculation; *) container - fixed container shell not working with multi-arg commands; *) container - fixed repull if root-dir of container was in tmpfs; *) container - fixed running "/container shell" with the correct user, if container user is set or overridden; *) container - improved errors at container start; *) container - improved running container instance memory usage; *) container - layers are now accessible under "Layers" tab; *) container - pass any container startup error message back to "run" and make it exit immediately; *) container - remove container backup directory if import fails; *) container - removed "Layers" button; *) container - show container size and container data size; *) container - show default DNS servers; *) container - show layer size calculation status; *) container - updated /dev/net/tun permissions; *) crypto - fixed fallback flag loss in qcrypto; *) crypto - fixed stability issue; *) crypto - improved safexcel driver with upstream changes and patches; *) dhcpv4-server - added "add-dns-entries" and "add-dns-entries-suffix" properties for creating local DNS entries; *) dhcpv4-server - changed lease agent-circuit-id and agent-remote-id format to hex; *) dhcpv4-server - do not raise an alert when receiving a packet originating from the same device; *) dhcpv4-server - do not suggest bogus pools when using setup command (e.g. when address is /31 or /32); *) dhcpv4-server - fixed an issue where renew packets without giaddr were sometimes not processed; *) discovery - added "add-dns-entries" and "add-dns-entries-suffix" properties for creating local DNS entries; *) discovery - added option to disable/enable LLDP MED; *) discovery - added separate read-only menu "/ip/neighbor/lldp" for neighbors discovered by LLDP (CLI only); *) discovery - dynamically update advertised "interface-name"; *) discovery - fixed LLDP MAC/PHY TLV; *) disk - added "/disk" smart-info; *) disk - added disk check and repair for ext4, Btrfs and XFS file systems; *) disk - improved device name tracking in "/system/resource/hardware" menu; *) disk - show disk io errors in "/disk" menu; *) dns - added HTTP/2 support to DoH on ARM64 and x86/CHR devices; *) ethernet - improved system stability for RB3011, L009, NetMetal ax, hAP ax lite devices; *) ethernet - improved system stability on devices with Alpine CPUs; *) fetch - fixed non-working idle-timeout in some cases; *) file - added copy, tail, head commands (CLI only); *) firewall - added "action=drop" to mangle; *) firewall - improved stability for SIP helper; *) firewall - matcher "in-bridge-port" does not require "use-ip-firewall=yes"; *) graphing - improved service stability when storing data; *) hardware - report the correct state of PCI devices in "/system/resource/hardware" menu; *) health - hide health menu for RB951ui-2nD; *) ike2 - fixed child SA cleanup during flush operation; *) ike2 - fixed pending responder connection cleanup after peer removal; *) ike2 - fixed SA delete handling on initiator during rekey; *) ike2 - improved HMAC size validation checks; *) interface - show warning when same MAC address is used on more than one virtual interface; *) iot - added LoRa Tx delay setting; *) iot - added MQTT subscribe message real-time monitoring option; *) iot - added Wiliot support; *) iot - fixed LoRa LBT issues, which caused Tx packets not getting delivered; *) iot - fixed LoRa lockpack preventing lock from applying; *) iot - improved LoRa stability; *) iot - improved LoRa Tx handling; *) iot - improved LoRa Tx scheduling; *) ip - added IPv6 and VRF support for reverse-proxy; *) ip - added SNI logging for reverse-proxy; *) ip - fixed hanging connections for reverse-proxy; *) ip-settings - added ipv4-fragment-time and ipv4-high-fragment-thresh settings, use default values based on total device memory; *) ipip - disabled IPv6 link-local address generation; *) ippool - fixed issue when changing pool with already used addresses; *) ippool6 - allow variable length pool; *) ippool6 - properly follow pool changes for already used prefixes; *) ipsec - added netlink-based SA and policy handling; *) ipsec - fixed SA proto parameter conversion and policy "none" type handling; *) ipsec - improved NAT encapsulation parameter forwarding; *) ipsec – fixed expired SA handling to prevent “no such item” errors during listing; *) ipv6 - added from-pool-policy address property that controls how address is acquired from the pool; *) ipv6 - added without-acquire address property; *) ipv6 - always ensure that prefix length matches the one given by the pool even if address was set to 0; *) ipv6,ra - added option to ignore MTU and DNS servers; *) ipv6,ra - added router-advertisement-route-distance setting; *) ipv6,ra - allow receiving DNS servers over multiple interfaces; *) ipv6,ra - clamp valid-lifetime to minimum of 2h on deprecation; *) ipv6,ra - extend processed RA logging; *) ipv6,ra - fixed advertised DNS parameter logging; *) ipv6,ra - fixed changing default "all" interface configuration; *) ipv6,ra - fixed DNS and pref64 property unset; *) ipv6,ra - fixed sending only DNS or MTU when prefix is set to "none"; *) ipv6,ra - improved service stability; *) ipv6,ra - warn when interface is under the bridge; *) isis - allow to configure metric-type; *) l3hw - added HW offloaded VRF support on CRS8xx switches; *) l3hw - added VRF assignment via switch ACL rules on CRS8xx switches (CLI only); *) l3hw - fixed VXLAN packet matching by local IP; *) leds - added new PoE fault LED cases (bad fw, PoE card power cable disconnected, PoE card not inserted); *) leds - fixed power LED turning off while LTE interface is inactive (introduced in v7.22); *) log - added "discover" topic and log events for discovered local DNS entries; *) log - added CC option for e-mail action; *) log - added ssld error logging; *) log - added TLS support; *) lte - added fast SIM switchover support using AT channel for MBIM modems without MBIM_CID_MS_UICC_RESET firmware support; *) lte - configure IP address for AT modems even if no DNS is received from the network; *) lte - delete CID profiles one by one instead of "delete all" for QMI modems, as command does not work for all modems; *) lte - do not duplicate primary-band also in ca-band for QMI modems in 5G SA network; *) lte - do not reconfigure modem in passthrough mode if passthrough cannot be activated because of slave interface; *) lte - emit RS every 60s on LTE interface; *) lte - filter packets by MAC in multi-apn setup for EC200A-EU modem; *) lte - fixed automatic modeswitch for "Chateau 5G R16" and "Chateau 5G"; *) lte - fixed broken network scan after being interrupted by reconfiguration; *) lte - fixed operator setting for QMI modems; *) lte - fixed rare cases where the Tx queue could stop and never wake up on multi-core CPU devices; *) lte - fixed RSSI signal monitor for 3rd party modems where AT+CSQ responses are not parsed; *) lte - fixed user set MTU not applied to LTE interface; *) lte - improved system stability for devices with QMI modems; *) lte - improved system stability when modem configured in passthrough mode with VLANs for "Chateau 5G R16" and "Chateau 5G"; *) lte - improved system stability; *) lte - improvements for passthrough mode in IPv6 only setup; *) lte - keep MAC persistent across reboots for QMI modems; *) lte - read subscriber number also for QMI modems; *) lte - removed LTE external-antenna scan; *) lte - set SMS send timeout to 180s; *) lte - show external-antenna as "none" before actual scan is done instead of empty value; *) lte - show MTU as "auto" also on interface level if "auto" used; *) lte - SIMCom modems, skip error state when modem sends improperly formatted CREG response/URC; *) lte - stop network scan on interruption for QMI modems; *) lte - unify "modem-init" for all driver types; *) macsec - added aes-gcm-xpn-128 cipher support; *) netwatch - fixed memory leak when using HTTP/HTTPS GET probe with invalid src-address; *) ospf - allow adding interface configuration manually, bypassing interface-template; *) ospf - change virtual link configuration to use OSPF interface directly; *) ospf - fixed missing interface-template configuration which previously was converted by upgrading from RouterOS v6; *) ospf - fixed nssa bit check; *) ospf - fixed routes not being installed on ABRs; *) pimsm - do not ignore priority when selecting RP from BSR; *) pimsm - fixed possible BSR loop; *) pimsm - improved stability; *) ping - resolve domain name to IPv6 if src-address is IPv6 address; *) ping - show time in microseconds for flood-ping; *) poe-out - firmware update for 802.3at capable boards (the update will cause a brief power interruption to poe-out interfaces); *) port - added support for "tcp-client" and "udp" modes for "remote-access"; *) port - expose RG650E-EU diagnostics channel; *) port - remove unused serial port on RB1100AHx4; *) pppoe - do not reset pppoe-client interface when adding a comment; *) ptp - added support for CRS812, CRS804; *) ptp - fixed crash during initialization on some devices; *) qos-hw - added automap setting to QoS Profiles (enabled by default); *) qos-hw - added ECN and PFC support on CRS8xx; *) qos-hw - added new default "auto" value to mirror-buffers, multicast-buffers, shared-buffers QoS Settings (old defaults are shown in export after upgrade); *) qos-hw - added queueX-byte-max stats to port usage on CRS8xx; *) qos-hw - fixed CPU traffic mapping to queues on CRS8xx switches; *) qos-hw - introduced lossless-traffic-class and lossless-buffers settings; *) qos-hw - removed shared-pool-index setting; *) route - fixed link-local interface check when resolving IPv6 nexthops; *) route - revert to old routing rule priorities for containers (introduced in v7.22); *) routerboot - fixed Netinstall failure when using multiple partitions on AL73400, AL52400, AL32400 CPUs ("/system routerboard upgrade" required); *) sftp - fixed path canonicalization request; *) smb - do not start /ip smb server on container interfaces; *) sniffer - added IP ECN field; *) sniffer - fixed missing VLAN tag in the TZSP packets; *) snmp - added missing BRIDGE-MIB OIDs (dot1dBaseNumPorts, dot1dBaseType, dot1dStpDesignatedRoot, dot1dStpPortDesignatedBridge, dot1dStpRootCost, dot1dStpRootPort, dot1dStpHoldTime, dot1dStpBridgeMaxAge, dot1dStpBridgeHelloTime, dot1dStpBridgeForwardDelay, dot1dStpPortForwardTransitions, dot1dTpAgingTime); *) snmp - added missing LLDP-MIB OIDs (lldpMessageTxInterval, lldpMessageTxHoldMultiplier, lldpLocManAddrTable); *) snmp - enforce minimum password length; *) snmp - fixed compliance of LLDP-MIB lldpRemManAddrTable; *) snmp - fixed connection tracking counter OID; *) snmp - fixed dot1dStpPortDesignatedPort, dot1dStpPortDesignatedRoot OIDs; *) snmp - fixed ifSpeed and ifHighSpeed OIDs for 802.3ad and balance-xor bonding interfaces; *) snmp - fixed lldpLocSysDesc OID; *) snmp - implemented LTE firmware upgrade option; *) snmp - use "/ip/neighbor/lldp" for lldpRemTable and lldpRemManAddrTable (fixes lldpRemTable showing neighbors discovered by MNCP or CDP); *) ssh - do not advertise password login method when it is disabled; *) ssh - improved host resolve error logging; *) switch - fixed issue with MAC table for RB2011 (introduced in v7.21); *) switch - fixed missing ethernet counters for non-running interfaces on CRS8xx switches (introduced in v7.22); *) switch - improved FDB operations on QCA8337, Atheros8327; *) switch - rework how IEEE reserved MAC addresses are handled on QCA8337, Atheros8327; *) switch - updated switch-marvell.npk driver; *) switch - use names instead of numbers in switch menu configuration export; *) system - improved handling of HTTP/2 connection closure; *) system - improved RouterOS package download over slow connection; *) system - improved switching to HTTP/1 if HTTP/2 is not supported by remote host; *) system - keep HTTP/2 connection open if it is not closed by system or server; *) system - make default identity based on board name; *) timezone - updated timezone information from "tzdata2026b" release; *) upgrade - added the option to configure HTTP/HTTPS modes when connecting to MikroTik upgrade servers; *) upgrade - changed status message for scheduled installs; *) upgrade - check for available packages when opening System/Packages in GUI; *) usb - added ax88179_178a driver; *) usb - improved USB Ethernet adapter recognition; *) usb - show USB device reported maximum power; *) user-manager - improved stability when removing user-profile while session updates counters; *) veth - fixed link-local address not being configurable as a gateway; *) vxlan - fixed fast-path when using "checksum=no" (introduced in v7.20); *) vxlan - improved system stability; *) webfig - added postfix byte value support (e.g. "/ip/settings/ipv4-high-fragment-thresh"); *) webfig - added support for filter in tables; *) wifi - improved interface provisioning for WiFi 7 access points; *) wifi - improved on-capsman traffic processing; *) wifi-mediatek - fixed multicast-enhance functionality; *) wifi-mediatek - fixed stability issue getting regulatory information and during initialization; *) wifi-qcom-be - fixed incorrect channel info for punctured channels; *) wifi-qcom-be - fixed stability issue during initialization; *) wifi-qcom-be,mediatek - correctly advertise RRM capabilities when 802.11k neighbor reports are enabled; *) winbox - added "MLD Static" and "MLD Datapath" properties under the "WiFi/CAP" menu; *) winbox - added "Multipath" property under the "Routing/BGP/Instance" menu; *) winbox - added “Remove” action under "System/Certificates/Requests" menu; *) winbox - added comment for DHCPv6 relay; *) winbox - added group numbers for DH and PFS groups for IPsec; *) winbox - allow setting "CAPsMAN address" for CAP as domain name; *) winbox - do not accept interface without specifying IP or MAC in "Ping To" field; *) winbox - improved "External Antenna" property display; *) winbox - improved Routing/PIM SM menu; *) winbox - move bridge IGMP Snooping checkbox to IGMP tab; *) winbox - rename DHCPv6 server binding "Peer Address" to "Client Address"; *) winbox - show "Directory URL" field for ACME certificates in Certificate view; *) winbox - show "IPv6 Address" property by default under the "IP/Neighbors" menu; *) winbox - show accepted connections in tree view under "IP/Services" menu; *) winbox - updated socksify icon for firewall NAT rules; *) wireguard - improved system stability; *) www - added partial content (HTTP 206) support; *) www - improved REST API user cache processing; *) www - improved system stability; *) zerotier - switch to 1.14.2 version; Свали от тукTue, 26 May 2026 08:40:00 +0000Нови. https://www.shelly.com/products/shelly-plug-s-gen3 Цена: 16 EuroThu, 21 May 2026 13:06:14 +0000Нови Sxt 5as ac 4бр 45€/бр Sxtsq 5ac 2бр 15€/бр Mk omnitik poe ac. 2бр 60€/бр Използвани Powerbeam m5(облъчватели) 4бр 10€/бр За повече инфо +42О 77 три О16 61 седемWed, 20 May 2026 15:56:57 +0000Wed, 20 May 2026 15:48:14 +0000Работи с Android Поддържа 4K резолюция HDMI изход Bluetooth 5.0 дистанционно с гласово набиране LAN и WiFi 2.4 и 5 MHz Захранване: адаптер 5V 2A или от телевизора Цена - 50€ Пишете тук или на личниThu, 14 May 2026 03:49:36 +0000What's new in 7.22.3 (2026-May-07 12:19): *) console - fixed unresponsiveness when entering safe-mode through the Windows 11 terminal; *) ethernet - fixed stability issue after switch reset on devices with IPQ-40xx, IPQ-60xx CPUs (introduced in v7.22); *) vrrp - fixed stability issue when using VRRP with a hardware-offloaded bridge for Marvell Prestera switch chip; Свали от тукFri, 08 May 2026 11:08:41 +0000Търся екип за изграждане на оптични мрежи Стара Загорски регионThu, 07 May 2026 11:54:17 +0000What's new in 7.22.2 (2026-Apr-22 11:03): *) app - fixed uptime-kuma and jupyter-notebook; *) bgp - fixed stability issue when non-existent output select-chain was specified; *) bridge - fixed missing dynamic "switch-cpu" VLAN entry in WiFi setup; *) bridge - synchronize only local bridge MAC addresses for MLAG (introduced in v7.22); *) console - rename "cpu-used-per-cpu" to "cpe-used-per-core" in "/system/resource/monitor"; *) container - fixed losing container after reboot; *) ethernet - fixed false excessive broadcast warning (introduced in v7.20); *) firewall - improved system stability; *) ipsec - fixed expired SA handling to prevent “no such item” errors during listing; *) ipv6,ra - use received prefix when RA on-link flag is 0 (introduced in v7.22); *) isis - improved stability with fragmented CSNP; *) leds - fixed default LED configuration for CCR2004-1G-12S+2XS; *) leds - fixed LED dark mode for RB5009; *) lte - fixed missing automatic redial when cellular connectivity is lost for R11e-LTE; *) ospf - improved stability on configuration change; *) ovpn - fixed OVPN push routes; *) poe-out - firmware update for 802.3at capable boards (the update will cause a brief power interruption to poe-out interfaces); *) poe-out - fixed occasional detection issue when using auto-on mode; *) ptp - allow manual domain configuration for 802.1AS profile; *) ptp - set DSCP (EF) for the default profile when using IPv4; *) route - improved service stability when removing routes; *) routerboard - fixed applying settings via WinBox on devices with fixed CPU frequency; *) system - added FCC Part 15 Compliance label to "System/Regulatory" menu; *) system - improved stability for internal RouterOS service communication; *) system - improved system stability; *) system - included full certificate chain to Windows executables; *) usb - fixed crash when using Ethernet adapter (introduced in v7.22); *) vrrp - fixed packet drop in CHR (introduced in v7.22); *) wifi - improved authentication stability for WiFi 7 access points; *) wifi-mediatek - fixed communication issues on 802.11ax access points with Intel clients; *) wifi-mediatek - fixed HE capabilities IE on 2GHz band; *) wifi-qcom-be - fixed forwarding of 4-address data from station to station; *) winbox - added option to configure built-in trust store for all services; *) www - improved service stability when cancelling REST API sessions; Свали от тукThu, 23 Apr 2026 06:59:34 +0000Здравейте, някой да има излишна Mikrotik mANTBox 19s (RB921GS-5HPacD-19S) - нужна е само кутията с антената вътре, борда и да не е оцелял, не е драма. Пишете на лични. Благодаря предварително.Mon, 06 Apr 2026 16:20:24 +0000Здравейте! Видях имаше подобна тема, но в нея е с поща на Gmail Ползвам АБВ, може ли помощ за настройка за да получавам лог файлаFri, 03 Apr 2026 14:12:09 +0000