6.42.4 changelog: *) bridge - allow to make changes for bridge port when it is interface list;
*) bridge - fixed FastPath for bridge master interfaces (introduced in v6.42);
*) certificate - fixed "add-scep" template existence check when signing certificate;
*) chr - fixed adding MSTI entries;
*) chr - fixed boot on hosts older than Windows Server 2012 when running CHR on Hyper-V;
*) chr - fixed various network hang scenarios when running CHR on Hyper-V;
*) console - fixed script permissio
6.43rc29 changelog: MAJOR CHANGES IN v6.43:
----------------------
!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after i
6.43rc27 changelog: MAJOR CHANGES IN v6.43:
----------------------
!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after i
6.43rc23 changelog: MAJOR CHANGES IN v6.43:
----------------------
!) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
!) backup - do not encrypt backup file unless password is provided;
!) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
!) cloud - reworked "/ip cloud ddns-enabled" implementation (suggested to disable service and re-enable after i
6.42.3 changelog: *) lte - fixed automatic LTE band selection for R11e-LTE;
*) wireless - improved client "channel-width" detection;
*) wireless - improved Nv2 PtMP performance;
*) wireless - increased stability on hAP ac^2 and cAP ac with legacy data rates; Download the new 'RouterOS 6.42.3' version here: https://www.mikrotik.com/download
6.43rc17 changelog: *) backup - do not encrypt backup file unless password is provided;
*) bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
*) bridge - added initial Q-in-Q support (CLI only);
*) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
*) crs3xx - fixed VLAN filtering when there is no tagged interface specified;
*) lte - added ICCID reading for info
6.42.2 changelog: *) bridge - do not allow to add same interface list to bridge more than once;
*) bridge - fixed LLDP packet receiving;
*) bridge - fixed processing of fragmented packets when hardware offloading is enabled;
*) console - fixed type "on" and "wireless-status" LED trigger value setting (introduced in v6.42.1);
*) crs317 - fixed link flapping when inserted S+RJ10 module without any cable;
*) defconf - fixed wAP LTE kit default configuration;
*) dhcpv4 - prevent sending out IC
6.43rc12 changelog: *) bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
*) crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
*) dhcpv4-server - fixed situation when router did reboot due to critical program crash (introduced in v6.43rc);
*) ipsec - improved reliability on IPsec hardware encryption for ARM devices except RB1100Dx4;
*) lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
*) wireless - add
6.43rc11 changelog: *) bridge - do not allow to add same interface list to bridge more than once;
*) console - fixed type "on" and "wireless-status" LED trigger value setting (introduced in v6.43rc1);
*) dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
*) dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
*) dhcpv6-server - added initial dynamic simple queue support;
*) filesystem - fixed situation when f
6.43rc6 changelog: *) bridge - fixed LLDP packet receiving;
*) bridge - fixed processing of fragmented packets when hardware offloading is enabled;
*) dhcpv6-relay - fixed missing configuration after reboot;
*) hotspot - fixed user authentication when queue from old session is not removed yet;
*) quickset - fixed dual radio mode detection process;
*) wireless - fixed usage of allowed signal strength values received from RADIUS;
*) wireless - improved Nv2 PtMP performance;
Other changes s
6.43rc5 changelog: *) ipsec - fixed policies becoming invalid if added after a disabled policy;
*) led - added "dark-mode" functionality for hAP ac and hAP ac^2 devices;
*) lte - allow to execute concurrent internal AT commands;
*) lte - improved r11e-LTE and r11e-LTE-US dialling process;
*) lte - improved reading of SMS message after entering running state;
*) ssh - disconnect all active connections when router gets rebooted or turned off;
*) tr069-client: - fixed setting of "DeviceInfo.P
6.40.8 changelog: *) certificate - fixed incorrect SCEP URL after an upgrade;
*) health - fixed empty measurements on CRS328-24P-4S+RM;
*) ike2 - use "policy-template-group" parameter when picking proposal as initiator;
*) ipv6 - fixed IPv6 behaviour when bridge port leaves bridge;
*) routerboard - fixed "mode-button" support on hAP lite r2 devices;
*) ssh - fixed SSH service becoming unavailable;
*) traffic-flow - fixed IPv6 destination address value when IPFIX protocol is used;
*) winbo
6.40.7 changelog: *) console - do not allow variables that start with digit to be referenced without "$" sign;
*) led - fixed unused "link-act-led" LED trigger on RBLHG 2nD, RBLHG 2nD-XL and RBSXTsq 2nD;
*) netinstall - sign Netinstall executable with an Extended Validation Code Signing Certificate;
*) romon - make "secret" field sensitive in console;
*) tr069-client - fixed TR069 service becoming unavailable when related service package is not installed;
*) winbox - fixed "/tool e-mail sen
6.40.7 changelog: *) console - do not allow variables that start with digit to be referenced without "$" sign;
*) led - fixed unused "link-act-led" LED trigger on RBLHG 2nD, RBLHG 2nD-XL and RBSXTsq 2nD;
*) netinstall - sign Netinstall executable with an Extended Validation Code Signing Certificate;
*) romon - make "secret" field sensitive in console;
*) tr069-client - fixed TR069 service becoming unavailable when related service package is not installed;
*) winbox - fixed "/tool e-mail sen
