6.42rc5 changelog: *) bridge - fixed bridge related settings conversation during upgrade from pre-v6.41 bridge implementation (introduced v6.41);
*) bridge - properly update "actual-mtu" after MTU value changes (introduced v6.41);
*) capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
*) detnet - additional work on "detect-internet" implementation;
*) detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.4
6.42rc2 changelog: *) dude - fixed e-mail notifications when default port is not used;
*) firewall - fixed "tls-host" firewall matcher;
*) firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
*) routerboot - fixed missing upgrade firmware for "ar7240" devices;
*) tile - fixed USB device speed detection after reboot;
*) traffic-flow - do not count single extra packet per each flow; Download the new 'RouterOS 6.42rc2' version here: https://www.mikrotik.com/download
6.41 changelog: *) arm - minor improvements on CPU load distribution for RB1100 series devices;
*) arp - fixed invalid static ARP entries after reboot on interfaces without IP address;
*) bgp - added 32-bit private ASN support;
*) bridge - added comment support for VLANs;
*) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx;
*) bridge - added support for "/interface list" as a bridge port;
*) bridge - assume "point-to-point=yes" for all Full Duplex Ethernet interfac
6.41rc61 changelog: *) bridge - disable "hw-offload" when "horizon" or "external-fdb" is set;
*) bridge - fixed hw-offloaded IGMP Snooping service getting stopped;
*) capsman - use "adaptive-noise-immunity" value from CAP local configuration;
*) certificate - added option to store CRL in RAM (CLI only);
*) certificate - improved CRL update after system startup;
*) certificate - show invalid flag when local CRL file does not exist;
*) crs317 - fixed reliability on FAN controller;
*) dhcpv4
6.41rc52 changelog: *) discovery - use "/interface list" instead of interface name under neighbor discovery settings;
*) hotspot - fixed Walled Garden IP functionality when address-list is used;
*) ovpn-server - do not periodically change automatically generated server MAC address;
*) poe - added new "poe-out" status "controller-error";
*) poe - fixed false positive excessive logs in auto-on mode when connected to 100 Mbps device powered from another power source;
*) poe - log PoE status re
6.41rc52 changelog: *) discovery - use "/interface list" instead of interface name under neighbor discovery settings;
*) hotspot - fixed Walled Garden IP functionality when address-list is used;
*) ovpn-server - do not periodically change automatically generated server MAC address;
*) poe - added new "poe-out" status "controller-error";
*) poe - fixed false positive excessive logs in auto-on mode when connected to 100 Mbps device powered from another power source;
*) poe - log PoE status re
6.40.5 changelog: *) certificate - fixed import of certificates with empty SKID;
*) crs3xx - fixed 100% CPU usage after interface related changes;
*) firewall - do not NAT address to 0.0.0.0 after reboot if to-address is used but not specified;
*) ike1 - fixed crash after downgrade if DH groups 19,20,21 were used for phase1;
*) ike1 - fixed RSA authentication for Windows clients behind NAT;
*) ipsec - fixed lost value for "remote-certificate" parameter after disable/enable;
*) ipv6 - fixed
6.41rc50 changelog: *) bridge - set "igmp-snooping=no" by default on new bridges;
*) crs3xx - added ingress/egress rate input limits;
*) dhcp-client - limited DHCP client "default-route-distance" minimal value to 1;
*) dhcp-server - added "option-set" argument (CLI only);
*) discovery - use "/interface list" instead of interface name under neighbor discovery settings;
*) health - fixed bogus voltage readings on CCR1009;
*) ike1 - fixed crash after downgrade if DH groups 19,20,21 were used
6.41rc44 changelog: *) bridge - added comment support for VLANs;
*) bridge - added support for "/interface list" as a bridge port;
*) crs317 - added initial support for HW offloaded MPLS forwarding;
*) crs3xx - fixed 100% CPU usage after interface related changes (introduced in v6.41rc31);
*) dhcpv4-client - add dynamic DHCP client for mobile clients which require it;
*) fetch - accept all HTTP 2xx status codes;
*) firewall - do not NAT address to 0.0.0.0 after reboot if to-address is used
6.41rc38 changelog: *) arm - minor improvements on CPU load distribution for RB1100 series devices;
*) bgp - added 32-bit private ASN support;
*) lte - added Passthrough support (CLI only);
*) snmp - fixed "/system license" parameters for CHR;
*) upnp - add "src-address" parameter on NAT rule if it is specified on UPnP request;
*) upnp - deny UPnP request if port is already used by the router;
Other changes since 6.40.4:
!) bridge - implemented software based vlan-aware bridges;
https:
6.40.4 changelog: *) address - show warning on IPv6 address when acquire from pool has failed;
*) arp - fixed invalid static ARP entries after reboot on interfaces without IP address;
*) crs1xx/2xx - fixed 1 Gbps forced mode for several SFP modules;
*) crs317 - added L2MTU support;
*) crs3xx - improved packet processing in slowpath;
*) defconf - fixed RouterOS default configuration (introduced in v6.40.3);
*) dhcp - fixed downgrade from RouterOS v6.41 or higher;
*) dhcpv6 client - added I
6.41rc37 changelog: *) bridge - initial support for "/interface list" as a bridge port (CLI only);
*) fetch - accept all HTTP 2xx status codes;
*) ike2 - fixed initiator DDoS cookie processing;
*) ike2 - fixed responder DDoS cookie first notify type check;
*) lte - fixed modem initialization after reboot;
*) ntp-client - properly start NTP client after reboot if manual server IP is not configured;
*) sfp - fixed OPTON module DDM information readings;
*) wireless - added "etsi1" regulatory
6.41rc34 changelog: *) crs3xx - improved packet processing in slowpath;
*) defconf - fixed RouterOS default configuration (introduced in v6.40.3);
*) ethernet - removed "master-port" parameter;
*) log - fixed "unknown" interface name in log messages;
*) lte - added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only);
*) lte - do not reset modem when it is not possible to access SMS storage;
*) snmp - fixed "ifHighSpeed" value of VLAN, VRRP and Bonding interfaces;
*
6.41rc32 changelog: *) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx;
*) bridge - implemented software based "igmp-snooping";
*) console - do not stop "/certificate sign" process if console times out in 1 minute;
*) lte - added "/interface lte apn" menu (Passthrough requires reconfiguration) (CLI only);
*) traceroute - improved "/tool traceroute" results processing;
*) wireless - log "signal-strength" when successfully connected to AP;
Other changes since 6.40.
6.41rc30 changelog: *) crs317 - added L2MTU support;
*) crs326 - fixed packet processing speed on switch chip if individual port link speed differs;
*) crs3xx - added port ingress and egress rate limiting;
*) export - fixed wireless "ssid" and "supplicant-identity" compact export;
*) ppp - fixed situation when part of PPP configuration was reset to default values after reboot;
*) wireless - added "allow-signal-out-of-range" option for Access List entries (CLI only);
Other changes since 6.
6.41rc28 changelog: *) console - do not stop "/certificate sign" process if console times out in 1 minute;
*) crs317 - added L2MTU support;
*) crs3xx - added port ingress and egress rate limiting;
*) log - added "bridge" topic;
*) lte - added Passthrough support (CLI only);
Other changes since 6.40.3:
!) bridge - general development of hw-offload bridge implementation (introduced in v6.40rc36);
!) bridge - implemented software based vlan-aware bridges;
https://wiki.mikrotik.com/wiki/Ma
6.41rc23 changelog: *) address - show warning on IPv6 address when acquire from pool has failed;
*) bridge - fixed connectivity issues when there are multiple VLAN interfaces on bridge;
*) bridge - show bridge interface local addresses in the host table;
*) crs317 - added initial support for HW offloaded MPLS forwarding;
*) dhcp - fixed DHCP services failing after reboot when DHCP option was used;
*) dhcpv4-client - allow to use DUID for client ID;
*) dhcpv6-client - require pool name to b
6.40.3 changelog: *) dhcpv6-server - do not release address of static binding from pool after server removal;
*) export - fixed "/system routerboard" export (introduced in 6.40.1);
*) export - fixed export for PoE-OUT related settings;
*) ike1 - fixed initiator ID comparison to NAT-OA;
*) led - fixed "on" and "off" triggers when multiple LEDs are selected;
*) led - fixed RB711UA ether1 LED (introduced in v6.38rc16);
*) lte - do not show USB LTE modem under "/port" menu;
*) lte - fixed eth