6.44beta14 changelog:
MAJOR CHANGES IN v6.44:----------------------
!) cloud - added command "/system backup cloud" for backup storing on cloud (CLI only);
!) upgrade - release channels renamed - "bugfix" to "long-term", "current" to "stable" and "release candidate" to "testing";
!) upgrade - "testing" release channel now can contain "beta" together with "release-candidate" versions;
----------------------
Changes in this release:
*) bridge - do not learn untagged frames when filtering only tagged packets;
*) bridge - fixed packet forwarding when changing MSTI VLAN mappings;
*) bridge - fixed possible memory leak when using MSTP;
*) bridge - improved packet processing when bridge port changes states;
*) bridge - properly forward unicast DHCP messages when using DHCP Snooping with hardware offloading;
*) cloud - improved DDNS service disabling;
*) dhcp - properly load DHCP configuration if options are configured;
*) dhcpv6-server - recreate DHCPv6 server binding if it is no longer within prefix pool when rebinding/renewing;
*) ethernet - fixed IPv6 packet forwarding on IPQ4018 devices;
*) ike2 - improved subsequent phase 2 initialization when no childs exist;
*) ipsec - added account log message when user is successfully authenticated;
*) ipsec - allow multiple peers to the same address with different local-address (introduced in v6.43);
*) ipsec - fixed stability issues after changing peer configuration (introduced in v6.43);
*) ipsec - improved invalid policy handling when a valid policy is uninstalled;
*) kidcontrol - added "reset-counters" command for "device" menu (CLI only);
*) kidcontrol - added "tur-fri", "tur-mon", "tur-sat", "tur-sun", "tur-thu", "tur-tue", "tur-wed" parameters (CLI only);
*) kidcontrol - dynamically discover devices from DNS activity;
*) kidcontrol - fixed validation checks for time intervals;
*) led - added "dark-mode" functionality for wsAP ac lite, RB951Ui-2nD, hAP and hAP ac lite devices;
*) lte - added additional ID support for Novatel USB730L modem;
*) lte - added "cell-monitor" command for R11e-LTE international modem (CLI only);
*) lte - added support for JioFi JMR1040 modem;
*) ntp - fixed possible NTP server stuck in "started" state;
*) rb3011 - implemented multiple engine IPsec hardware acceleration support;
*) romon - improved packet processing when MTU in path is lower than 1500;
*) snmp - fixed w60g station table;
*) snmp - report bridge ifSpeed as "0";
*) ssh - fixed single command execution (introduced in v6.44beta9);
*) traffic-flow - fixed post NAT port reporting;
*) w60g - added interface stats;
*) w60g - renamed "mcs" to "tx-mcs" and "phy-rate" to "tx-phy-rate";
*) wireless - improved stability for 802.11ac;
Other changes since v6.43:
*) bridge - improved packet handling when hardware offloading is being disabled;
*) chr - assign interface names based on underlying PCI device order on KVM;
*) cloud - ignore "force-update" command if DDNS is disabled;
*) crs3xx - fixed possible memory leak when disabling bridge interface;
*) crs3xx - improved data transmission between 10G and 1G ports;
*) dhcpv4-server - fixed service becoming unresponsive after interface leaves and enters the same bridge;
*) discovery - properly use Sytem ID for "software-id" value on CHR;
*) e-mail - added info log message when e-mail is sent successfully;
*) ethernet - fixed IPv6 packet forwarding on IPQ4018 devices;
*) ike2 - added option to specify certificate chain;
*) ike2 - fixed local address lookup when initiating new connection;
*) lte - fixed DHCP relay packet forwarding when in passthrough mode;
*) lte - fixed Jaton/SQN modems preventing router from booting properly;
*) proxy - removed port list size limit;
*) romon - improved reliability when processing RoMON packets on CHR;
*) routerboard - show "boot-os" option only on devices that have such feature;
*) switch - fixed ACL rules on IPQ4018 devices;
*) w60g - added "frequency-list" setting;
*) w60g - fixed interface LED status update on connection;
*) winbox - added 4th chain selection for "HT TX chains" and "HT RX chains" under "CAPsMAN/CAP Interface/Wireless" tab;
*) winbox - added "radio-name" setting to "CAPsMAN/CAP Interface/General" tab;
*) winbox - added "secondary-channel" setting to "CAPsMAN/CAP Interface/Channel" tab;
*) winbox - allow setting "network-mode" to "auto" under LTE interface settings;
Download the new 'RouterOS 6.44beta14' version here: https://www.mikrotik.com/download
0 Comments
Recommended Comments
There are no comments to display.
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now