Jump to content

Излязла е нова версия на RouterOS v6.42.2


Recommended Posts

*) bridge - do not allow to add same interface list to bridge more than once;
*) bridge - fixed LLDP packet receiving;
*) bridge - fixed processing of fragmented packets when hardware offloading is enabled;
*) console - fixed type "on" and "wireless-status" LED trigger value setting (introduced in v6.42.1);
*) crs317 - fixed link flapping when inserted S+RJ10 module without any cable;
*) defconf - fixed wAP LTE kit default configuration;
*) dhcpv4 - prevent sending out ICMP port unreachable packets;
*) dhcpv4-client - fixed DHCP client stuck in renewing state;
*) dhcpv6-relay - fixed missing configuration after reboot;
*) filesystem - fixed NAND memory going into read-only mode;
*) hotspot - fixed user authentication when queue from old session is not removed yet;
*) interface - fixed "built-in=no" parameter for manually created interface lists;
*) interface - fixed "dynamic" built-in interface list behaviour;
*) interface - fixed interface list which include disabled member;
*) interface - fixed interface list which include/exclude another list;
*) interface - fixed interface configuration responsiveness;
*) ipsec - fixed policies becoming invalid if added after a disabled policy;
*) ipsec - improved reliability on IPsec hardware encryption for ARM devices except RB1100Dx4;
*) led - added "dark-mode" functionality for hAP ac and hAP ac^2 devices;
*) lte - improved LTE communication process on MMIPS platform devices;
*) quickset - fixed dual radio mode detection process;
*) routerboard - properly represent board name for hAP ac^2;
*) tile - fixed Ethernet interfaces becoming unresponsive;
*) winbox - allow to specify "any" as wireless "access-list" interface;
*) winbox - fixed "/ip dhcp-server network set dns-none" parameter;
*) wireless - enable all chains by default on devices without external antennas after configuration reset;
*) wireless - fixed packet processing when "static-algo-0=40bit-wep" is being used (introduced in v6.42);
*) wireless - fixed usage of allowed signal strength values received from RADIUS;
*) wireless - improved wireless throughput on hAP ac^2 and cAP ac;
*) x86 - fixed reboot caused by MAC Winbox connection;

Свали от тук

Адрес на коментара
Сподели в други сайтове

Създайте нов акаунт или се впишете, за да коментирате

За да коментирате, трябва да имате регистрация

Създайте акаунт

Присъединете се към нашата общност. Регистрацията става бързо!

Регистрация на нов акаунт

Вход

Имате акаунт? Впишете се оттук.

Вписване
  • Потребители разглеждащи страницата   0 потребители

    • No registered users viewing this page.
×
×
  • Създай нов...

Important Information

By using this site, you agree to our Terms of Use.