News Posted June 7, 2022 Report Share Posted June 7, 2022 7.3 changelog:*) bgp - added "name" parameter for connections; *) bgp - added initial support for prefix limit; *) bgp - fixed "keepalive-timeout" value when upgrading from RouterOS v6; *) bgp - fixed "l2vpn" distribution; *) bgp - improved stability when editing BGP template; *) bgp - moved "interface bgp-vpls" menu to "routing bgp vpls"; *) bgp - remove unused commands and parameters; *) bluetooth - improved long-term service stability; *) bonding - added "lacp-user-key" setting; *) bonding - fixed LACP flapping for RB5009 and CCR2004-16G-2S+ devices; *) bridge - added more details for loop detection warning; *) bridge - do not set VLAN on inactive port with a "set" command; *) bridge - fixed TCP, UDP port parsing for loop detect warning; *) bridge - fixed packet marking for IP/IPv6 firewall; *) bridge - ignore VLAN tagged BPDU; *) capsman - fixed bridge disabling when using L2 connection; *) capsman - fixed loss of manager configuration when "package-path" is set to external disk; *) capsman - improved traffic processing over CAP communication tunnels: *) ccr - added "passthrough" flag for interfaces on CCR2004-1G-2XS-PCIe; *) ccr - added visible "passthrough" flag for interfaces on CCR2004-1G-2XS-PCIe; *) ccr - improved interface link stability on CCR2004-16G-2S+PC; *) ccr - usability and stability improvements for passthrough interfaces on CCR2004-1G-2XS-PCIe; *) cd-install - allow selecting on which drive to install RouterOS; *) chr - fixed Cloud DDNS update after license renewal; *) conntrack - limited full Connection Tracking warning to 1 message per minute; *) console - fixed "terminal inkey" command; *) crs1xx/2xx - improved system stability during switch reset; *) defconf - do not add passthrough ports to local bridge on CCR2004-1G-2XS-PCIe; *) dhcpv4-server - added "age" parameter for dynamic leases; *) dhcpv4-server - fixed conflicting or declined lease detection when IP pool differs from server's configuration; *) dhcpv4-server - fixed minor logging typo; *) dot1x - fixed RADIUS State attribute when client is reauthenticated; *) dot1x - fixed port based VLAN ID assignment on devices without a switch chip; *) dot1x - improved server stability when using re-authentication; *) export - fixed value ID exporting that does not refer to any name; *) fetch - fixed SFTP upload; *) fetch - improved full disk detection; *) filesystem - fixed possible boot failure on RB850Gx2 and RB1100AHx2; *) filesystem - improved UBIFS stability and data integrity after downgrade to RouterOS v6 and upgrade to RouterOS v7; *) filesystem - improved long-term filesystem stability and data integrity; *) gps - added GPS package support for Chateau devices; *) gps - fixed minor value unit typo; *) ipsec - fixed IPsec IRQ initialization on startup on TILE; *) ipsec - fixed printing of active peer statistics; *) ipv6 - added "ra-preference" parameter support for RA; *) ipv6 - fixed dynamic non link-local addresses displaying; *) ipv6 - removed bogus commands from IPv6 neighbors menu; *) l2tp - added VRF support for L2TP client; *) l3hw - greatly improved route offloading speed; *) l3hw - improved offloading for directly connected hosts on CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310; *) l3hw - improved offloading in cases of HW table overflow for CRS305, CRS326-24G-2S+, CRS328, CRS318, CRS310; *) l3hw - improved route table offloading for CRS317, CRS309, CRS312, CRS326-24S+2Q+, CRS354, CRS5xx, CCR2x16 devices; *) l3hw - log HW routes count and the shortest offloaded subnet prefix if the HW memory gets full; *) l3hw - offload only main routing table; *) l3hw - optimized offloading when dealing with large volume of directly connected hosts; *) l3hw - partial routing table offload for Marvell Prestera DX4000/DX8000 switch chip series; *) leds - fixed ethernet LED behavior on wAP R ac; *) leds - fixed wireless related LED behavior with WW2 package; *) lhgg - improved system stability (introduced in v7.2); *) lora - do not allow setting non-existing forwarding server; *) lora - fixed bogus TOO_EARLY errors; *) lora - removed TX lookup table; *) lte - added SMS sending support for MBIM protocol; *) lte - added support for generic PXA1802 based modems; *) lte - allow only MCC/NMC format in "operator" parameter; *) lte - clear SIM values when modem in "stopped" state; *) lte - disabled extended signal info query for Telit LN940 module; *) lte - disabled wait for LTE auto attach; *) lte - expose diagnostics channel for all modems; *) lte - fixed LTE firwmare upgrade on RBLtAP-2HnD with R11e-LTE6; *) lte - fixed Sierra MC7455 modem initialization; *) lte - hide slave interfaces from export; *) lte - improved LTE interface initialization process on LtAP-2HnD; *) lte - improved stability when configuring multiple APN's at the same time in MBIM mode; *) lte - improved stability when upgrading LTE firmware on Chateau 5G; *) mlag - fixed MAC address moving between bridge ports; *) mpls - do MPLS forwarding for nexthops without mappings; *) mpls - fixed MPLS MTU and path MTU selection; *) mpls - fixed MPLS forwarding after any interface configuration parameter is changed; *) mpls - improved LDP AF selection process and behavior; *) mpls - made LDP bindings work on PPP interfaces; *) ntp - do not allow setting port number in "server" parameter; *) ntp - fixed "use-local-clock" behavior when enabling server; *) ospf - fixed GRE interface compatibility with OSPF; *) ospf - ignore instance route when originate-default=if-installed is enabled; *) ospf - improved stability when enabling or removing interface-template entries; *) ovpn - adjusted SHA2 authentication algorithm naming to allow legacy OpenVPN implementations to connect; *) ovpn - fixed hardware offloading support on CHR; *) ovpn - fixed memory leak on TILE architecture; *) ovpn - fixed packet processing on MT7621A; *) ovpn - fixed server instance not responding to incoming connections after reboot on CHR; *) ovpn - improved Windows client disconnect procedure in UDP mode; *) ovpn - improved server stability under continous overload; *) ovpn - improved service stability when outbound packets are blocked by firewall in UDP mode; *) ovpn - improved service stability when processing frequent disconnects in UDP mode; *) ovpn - improved stability when forwarding traffic on TILE; *) ovpn - moved authentication failure messages to "info" logging level; *) ovpn - reply with the same IP address that the connection was established to; *) ping - fixed socket allocation after VRF change; *) port - do not loose "parity" setting; *) ppp - added support for VRF; *) ppp - added warning when using prefix length other than /64 for router advertisement; *) ppp - fixed "remote-ipv6-prefix" parameter unsetting; *) ppp - fixed active sessions sometimes getting stuck; *) ppp - fixed issue with multiple active sessions when "only-one" is enabled; *) profile - added "wireguard" process classificator; *) profile - added "zerotier" process classificator; *) qsfp - reset module only when all ports are disabled; *) queue - allow to set higher limits than 4G; *) queue - display warning for CAKE type in simple and tree setups when "bandwidth" parameter is configured; *) queue - improved stability in large list of queue scenarios; *) rb5009 - fixed 10G linking issues with Intel X520, XXV710 NICs; *) resource - fixed CPU type display under system resources for ARM and ARM64; *) romon - fixed VLAN tagged packet processing; *) route - fixed "nexthop" table printing; *) route - fixed "table" menu emptying after RouterOS upgrade; *) route - fixed IPv6 /127 route nexthop resolution; *) route - fixed static routes in VRF becoming invalid after reboot; *) route-filter - fixed community matchers; *) routerboard - fixed USB bus numbering on LtAP and M33G; *) routerboot - added extra shortcut information on how to boot into etherboot; *) routerboot - prevent enabling "protected-routerboot" on unsupported factory firmware versions; *) routerboot - properly reset system configuration when protected bootloader is enabled and reset button used; *) rsvp-te - improved stability when "Resv" received for non-existing session; *) sfp - added 2.5Gbps rate for SFP+ and QSFP+ interfaces on 98DXxxxx and 98PX1012 switches (requires disabled auto-negotiation); *) sfp - hide empty monitor values in console; *) sfp - improved Q/SFP interface initialization and stability for 98DXxxxx and 98PX1012 switches; *) sfp - improved QSFP/SFP interface initialization for 98DXxxxx switches; *) smb - fixed SMB2 file list reporting; *) snmp - added VRF support (CLI only); *) snmp - added VRF support; *) snmp - fixed reported disk size when multiple external disks are attached; *) snmp - hide Vendor ID in DHCP MIB when branding is present; *) snmp - report "ifSpeed" as 0 if value out of bounds (use "ifHighSpeed" for high speed interfaces instead); *) ssh - added AES-GCM cipher support; *) ssh - fail non-interactive client after first invalid password; *) ssh - fixed corrupt host key automatic regeneration; *) ssh - fixed private key usage after downgrade; *) ssh - removed DSA public key authentication support; *) supout - added IGMP-Proxy section; *) supout - added NTP servers section; *) supout - added PIMSM section; *) supout - added RIP section; *) supout - added WireGuard section; *) supout - added simplified IPv4 and IPv6 routing table prints; *) switch - added option to match source and destination IP addresses in ARP packets for RB5009 (requires mac-protocol=arp setting); *) switch - fixed missing stats from traffic-monitor for 98DXxxxx and 98PX1012 switches; *) system - fixed IP service initialization in VRF after system startup; *) system - fixed Kernel timer consistency; *) system - fixed rare partial loss of RouterOS configuration after package upgrade/downgrade/install/uninstall; *) torch - properly capture all related IPv6 traffic; *) tr069-client - fixed RPC download of "1 Vendor Configuration File" with branding package; *) tunnels - improved packet handling over EoIP, IPIP and GRE tunnels; *) upnp - improved stability when processing incomplete HTTP header; *) user-manager - added "Acct-Interim-Interval" to predefined attribute list; *) user-manager - improved stability when received EAP attribute with non-existing state attribute; *) vpls - fixed "pw-l2mtu" parameter usage; *) vpls - fixed TE transport path usage after startup; *) vrrp - fixed learning of bridged local MAC addreses; *) w60g - improved stability on Cube 60Pro ac and CubeSA 60Pro ac; *) webfig - properly show all routing table content; *) wifiwave2 - fixed VLAN tag handling; *) wifiwave2 - general stability and throughput improvements; *) winbox - added "Comment" parameter for BGP templates and connections; *) winbox - added "Default Cost" parameter under "Routing/OSPF/Area" menu; *) winbox - added "ra-preference" parameter under "IPv6/ND" menu; *) winbox - added SKID and AKID parameters under "Certificate" menu; *) winbox - added missing "IBGP", "EBGP", "Limit Exceeded" and "Stopped" parameters under "Routing/BGP/Sessions" menu; *) winbox - added missing "Keep Sent Attributes" parameter under "Routing/BGP/Connection" menu; *) winbox - added missing "Scan List" parameter for W60G interfaces; *) winbox - added missing BGP session commands; *) winbox - added support for 2.5Gbps and 100Gbps Ethernet speed options; *) winbox - added warning message for LTE upgrade process; *) winbox - do not auto start Wireless Sniffer when opened; *) winbox - do not show "Session Uptime" parameter under "LTE" menu if not supported by modem; *) winbox - do not show "unknown" area under "Routing/OSPF/LSA" menu; *) winbox - do not show type value for NXDOMAIN entries under "IP/DNS/Cache" menu; *) winbox - fixed "Disconnect Timeout" parameter type under "CAPsMAN" menu; *) winbox - fixed "IP/Cloud" window refreshing after changes are detected; *) winbox - fixed "Type" values under "IP/Route" menu; *) winbox - fixed graph drawing in QuickSet; *) winbox - fixed hex type values under "User Manager" menu; *) winbox - fixed minor typo in reboot confirmation prompt; *) winbox - fixed typo in ZeroTier instance title; *) winbox - made "Interface Templates" table sortable under "Routing/OSPF" menu; *) winbox - made "MPLS Interface" table sortable under "MPLS" menu; *) winbox - made 56 the default ping size; *) winbox - made wireless access list entries sortable when using the wifiwave2 package; *) winbox - minimal required version is v3.33; *) winbox - moved "src-address-list" and "dst-address-list" parameters to "General" tab under "IP/Firewall" menu; *) winbox - moved "src-address-list" and "dst-address-list" parameters to "General" tab under "IPv6/Firewall" menu; *) winbox - properly clean up SFP module information after it is unplugged; *) winbox - properly clean up disk after a failed file upload; *) winbox - properly load band values under "LTE" menu; *) winbox - removed obsolete "Routing Table" parameter under "IP/Firewall" menu; *) winbox - show "System/RouterBOARD/Mode Button" on devices that have such feature; *) winbox - show PVID column by default under "Bridge" menu; *) winbox - show correct file system type under "System/Disks" menu; *) winbox - take into account timezone for timed values under "User Manager" menu; *) wireless - fixed "wmm-support=required" checking; *) wireless - fixed EAP-TLS authentication; *) wireless - fixed GUD version in 3gpp information; *) x86 - added support for Solarflare SFC1920 NIC; *) x86 - fixed soft-id reading on virtualized x86 installations (introduced in v7.2); *) x86 - improved support for Intel E810 NIC; *) zerotier - added support for Controller configuration; Свали от тук Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now