Jump to content
  • публикации
    7301
  • коментара
    2
  • преглеждания
    50883

Contributors to this blog

  • Влади 19

RouterOS 6.44beta39 [Testing]

Гост

1 преглед

6.44beta39 changelog:

Important note!!! Backup before upgrade!
Due to major IPsec configuration changes in RouterOS v6.44beta39+ (see changelog below), it is advised to make a backup before upgrading. Regular downgrade will still be possible as long as no changes in IPsec peer menu are done.

MAJOR CHANGES IN v6.44:
----------------------
!) cloud - added command "/system backup cloud" for backup storing on cloud (CLI only);
!) radius - initial implementation of RadSec (Radius communication over TLS);
!) upgrade - release channels renamed - "bugfix" to "long-term", "current" to "stable" and "release candidate" to "testing";
!) upgrade - "testing" release channel now can contain "beta" together with "release-candidate" versions;
----------------------

Changes in this release:

!) ipsec - added new "identity" menu with common peer distinguishers;
!) ipsec - removed "main-l2tp" exchange-mode, it is the same as "main" exchange-mode;
!) ipsec - removed "users" menu, XAuth user configuration is now handled by "identity" menu;
!) speedtest - added "/tool speed-test" for ping latency, jitter, loss and TCP and UDP download, upload speed measurements (CLI only);
*) btest - added multithreading support for both UDP and TCP tests;
*) bridge - properly disable dynamic CAP interfaces;
*) btest - added warning message when CPU load exceeds 90% (CLI only);
*) certificate - fixed "expires-after" parameter calculation;
*) certificate - properly flush old CRLs when changing store location;
*) certificate - added support for multiple "Subject Alt. Names" (CLI only);
*) chr - correctly initialize grant table version 1;
*) cloud - added "ddns-update-interval" parameter (CLI only);
*) cloud - do not reuse old UDP socket if routing changes are detected;
*) cloud - made address updating faster when new public address detected;
*) conntrack - added new "loose-tcp-tracking" parameter (equivalent to "nf_conntrack_tcp_loose" in netfilter) (CLI only);
*) console - renamed IP protocol 41 to "ipv6-encap";
*) dhcpv4-server - added "User-Name" attribute to RADIUS accounting messages;
*) ethernet - fixed IPv4 and IPv6 packet forwarding on IPQ4018 devices;
*) ethernet - improved per core ethernet traffic classificator on mmips devices;
*) gps - added "coordinate-format" parameter (CLI only);
*) ike2 - added peer identity validation for RSA auth (disabled after upgrade);
*) ike2 - allow to match responder peer by "my-id=fqdn" field;
*) ike2 - properly handle certificates with empty "Subject";
*) ike2 - send split networks over DHCP (option 249) to Windows initiators if DHCP Inform is received;
*) interface - improved system stability when including/excluding a list to itself;
*) ipsec - added new "remote-id" peer matcher (CLI only);
*) ipsec - allow to specify single address instead of IP pool under "mode-config";
*) ipsec - hide empty prefixes on "peer" menu;
*) ipsec - made dynamic "src-nat" rule more specific;
*) ipsec - made peers autosort themselves based on reachability status;
*) ipsec - properly detect AES-NI extension as hardware AEAD;
*) ipsec - properly handle peer profiles on downgrade;
*) ipsec - removed limitation that allowed only single "auth-method" with the same "exchange-mode" as responder;
*) kidcontrol - added statistics web interface for kids (http://router.lan/kid-control);
*) kidcontrol - do not allow users with "read" policy to pause and resume kids;
*) kidcontrol - properly detect time zone changes;
*) log - properly handle long echo messages;
*) led - fixed default LED configuration for wAP 60G AP devices;
*) lte - added "ecno" field for "info" command;
*) lte - added "firmware-upgrade" command for R11e-LTE international modems (CLI only);
*) lte - added support for more ZTE MF90 modems;
*) lte - improved compatibility for Alt38xx modems;
*) lte - increased reported "rsrq" precision (CLI only);
*) profiler - classify kernel crypto processing as "encrypting";
*) routerboard - renamed SIM slots to "a" and "b" on SXT LTE kit;
*) sniffer - save packet capture in "802.11" type when sniffing on w60g interface in "sniff" mode;
*) snmp - do not initialise interface traps on bootup if they are not enabled;
*) ssh - added "allow-none-crypto" parameter to disable "none" encryption usage (CLI only);
*) timezone - updated timezone information from tzdata2018g release;
*) traffic-flow - fixed "src-mac-address" and added "post-src-mac-address" fields;
*) traffic-flow - reduced minimal value of "active-flow-timeout" parameter to 1s;
*) tunnel - properly clear dynamic IPsec configuration when removing/disabling EoIP with DNS as "remote-address";
*) upgrade - made security package depend on DHCP package;
*) usb - fixed power-reset for hAP ac^2 devices;
*) user - speed up first time login process after upgrade from version older than v6.43;
*) userman - show redirect location in error messages;
*) w60g - added "10s-average-rssi" parameter to align mode (CLI only);
*) w60g - improved reconnection detection;
*) w60g - improved "tx-packet-error-rate" reading;
*) winbox - allow to specify SIM slot on LtAP mini;
*) winbox - enabled "fast-forward" by default when adding new bridge;
*) winbox - show "Switch" menu on RB4011iGS+5HacQ2HnD;
*) winbox - show "System/Health" only on boards that have health monitoring;
*) winbox - show "W60G" wireless tab on wAP 60G AP;
*) wireless - improved system stability for all ARM devices with wireless;
*) wireless - report last seen IP address in RADIUS accounting messages;

Other changes since v6.43:

*) bridge - added option to monitor fast-forward status;
*) bridge - disable fast-forward when using SlowPath features;
*) bridge - fixed DHCP Option 82 parsing when using DHCP Snooping;
*) bridge - fixed packet forwarding when changing MSTI VLAN mappings;
*) bridge - fixed possible memory leak when using MSTP;
*) bridge - improved packet processing when bridge port changes states;
*) certificate - fixed time zone adjustment for SCEP requests;
*) chr - assign interface names based on underlying PCI device order on KVM;
*) cloud - ignore "force-update" command if DDNS is disabled;
*) cloud - improved DDNS service disabling;
*) crs328 - fixed SFP+ interface linking on CRS328-24P-4S+RM (introduced in v6.44beta17);
*) crs328 - fixed SFP ports not reporting auto-negotiation status;
*) crs328 - improved link status update on disabled SFP and SFP+ interfaces;
*) crs3xx - improved data transmission between 10G and 1G ports;
*) defconf - automatically accept default configuration if reset done by holding button;
*) defconf - fixed configuration not generating properly on upgrade;
*) dhcp - added "allow-dual-stack-queue" setting for IPv4/IPv6 DHCP servers to control dynamic lease/binding behaviour (CLI only);
*) dhcp - properly load DHCP configuration if options are configured;
*) dhcpv4-server - fixed service becoming unresponsive after interface leaves and enters the same bridge;
*) dhcpv6-server - improved DHCPv6 server stability when using "print" command;
*) discovery - properly use Sytem ID for "software-id" value on CHR;
*) e-mail - added info log message when e-mail is sent successfully;
*) ethernet - fixed linking issues on wAP ac, RB750Gr2 and Metal 52 ac (introduced in v6.43rc52);
*) fetch - fixed fetching with "as-value" creating an empty file (introduced in v6.44beta20);
*) fetch - fixed "without-paging" option;
*) health - fixed bad voltage readings on RB493G;
*) health - improved fan control stability on CRS328-24P-4S+RM;
*) ike2 - added option to specify certificate chain;
*) ike2 - fixed local address lookup when initiating new connection;
*) ike2 - improved subsequent phase 2 initialization when no childs exist;
*) ike2 - show weak pre-shared-key warning;
*) ipsec - added account log message when user is successfully authenticated;
*) ipsec - added basic pre-shared-key strength checks;
*) ipsec - fixed hw-aead (H) flag presence under Installed SAs on startup;
*) ipsec - fixed stability issues after changing peer configuration (introduced in v6.43);
*) ipsec - improved invalid policy handling when a valid policy is uninstalled;
*) ipsec - improved stability when uninstalling multiple SAs at once;
*) ipsec - properly update warnings under peer menu;
*) kidcontrol - added "reset-counters" command for "device" menu (CLI only);
*) kidcontrol - added "tur-fri", "tur-mon", "tur-sat", "tur-sun", "tur-thu", "tur-tue", "tur-wed" parameters (CLI only);
*) kidcontrol - dynamically discover devices from DNS activity;
*) kidcontrol - fixed validation checks for time intervals;
*) lte - added additional ID support for Novatel USB730L modem;
*) lte - added "cell-monitor" command for R11e-LTE international modem (CLI only);
*) lte - added support for JioFi JMR1040 modem;
*) lte - fixed connection issue when LTE modem was de-registered from network for more than 1 minute;
*) lte - fixed DHCP relay packet forwarding when in passthrough mode;
*) lte - fixed IPv6 activation for R11e-LTE-US modems;
*) lte - fixed Jaton/SQN modems preventing router from booting properly;
*) lte - fixed LTE interface not working properly after reboot on RBSXTLTE3-7;
*) lte - fixed missing running (R) flag for Jaton LTE modems;
*) ospf - improved stability while handling type-5 LSAs;
*) port - improved "remote-serial" TCP performance in RAW mode;
*) proxy - removed port list size limit;
*) rb3011 - implemented multiple engine IPsec hardware acceleration support;
*) rbm33g - improved stability when used with some USB devices;
*) romon - improved reliability when processing RoMON packets on CHR;
*) routerboard - require at least 10 second interval between "reformat-hold-button" and "max-reformat-hold-button";
*) routerboard - show "force-backup-booter" option only on devices that have such feature;
*) snmp - added "dot1qPortVlanTable" and "dot1dBasePortTable" OIDs;
*) snmp - fixed w60g station table;
*) snmp - report bridge ifSpeed as "0";
*) ssh - added error log message when key exchange fails;
*) ssh - fixed non-interactive shell not returning all output (introduced in v6.44);
*) ssh - fixed single command execution (introduced in v6.44beta9);
*) switch - fixed ACL rules on IPQ4018 devices;
*) tr069-client - fixed HTTP cookie getting duplicated with the same key;
*) tunnel - made "ipsec-secret" parameter sensitive;
*) w60g - added align mode "/interface w60g align" (CLI only);
*) w60g - fixed scan in bridge mode;
*) w60g - improved PtMP performance;
*) w60g - renamed disconnection message when license level did not allow more connected clients;
*) w60g - renamed "frequency-list" to "scan-list";
*) winbox - added 4th chain selection for "HT TX chains" and "HT RX chains" under "CAPsMAN/CAP Interface/Wireless" tab;
*) winbox - added "radio-name" setting to "CAPsMAN/CAP Interface/General" tab;
*) winbox - added "secondary-channel" setting to "CAPsMAN/CAP Interface/Channel" tab;
*) winbox - allow setting "network-mode" to "auto" under LTE interface settings;
*) wireless - improved signal strength at low TX power on LHG 5 ac, LHG 5 ac XL and LDF 5 ac ("/system routerboard upgrade" required);
*) wireless - improved stability for 802.11ac;
*) wireless - removed G/N support for 2484MHz in "japan" regulatory domain;

Download the new 'RouterOS 6.44beta39' version here: https://www.mikrotik.com/download



0 Коментара


Recommended Comments

Няма коментари.

Създайте нов акаунт или се впишете, за да коментирате

За да коментирате, трябва да имате регистрация

Създайте акаунт

Присъединете се към нашата общност. Регистрацията става бързо!

Регистрация на нов акаунт

Вход

Имате акаунт? Впишете се оттук.

Вписване
×

Important Information

By using this site, you agree to our Terms of Use.