Jump to content
  • публикации
    7330
  • коментара
    2
  • преглеждания
    52235

Contributors to this blog

  • Влади 19

RouterOS 6.44beta17 [Testing]

Гост

103 прегледа

6.44beta17 changelog:

MAJOR CHANGES IN v6.44:
----------------------
!) cloud - added command "/system backup cloud" for backup storing on cloud (CLI only);
!) upgrade - release channels renamed - "bugfix" to "long-term", "current" to "stable" and "release candidate" to "testing";
!) upgrade - "testing" release channel now can contain "beta" together with "release-candidate" versions;
----------------------

Changes in this release:

*) bridge - fixed possible memory leak when VLAN filtering is used;
*) dhcpv4-server - use client MAC address for dual stack queue when "client-id" is not received;
*) ethernet - fixed IPv6 packet forwarding on IPQ4018 devices;
*) health - improved fan control stability on CRS328-24P-4S+RM;
*) led - fixed default LED configuration for SXT LTE kit devices;
*) led - fixed power LED turning on after reboot when "dark-mode" is used;
*) lte - added "firmware-upgrade" command for R11e-LTE international modems (CLI only);
*) wireless - improved signal strength at low TX power on LHG 5 ac, LHG 5 ac XL and LDF 5 ac ("/system routerboard upgrade" required);

Other changes since v6.43:

*) bridge - do not learn untagged frames when filtering only tagged packets;
*) bridge - fixed packet forwarding when changing MSTI VLAN mappings;
*) bridge - fixed possible memory leak when using MSTP;
*) bridge - improved packet handling when hardware offloading is being disabled;
*) bridge - improved packet processing when bridge port changes states;
*) bridge - properly forward unicast DHCP messages when using DHCP Snooping with hardware offloading;
*) chr - assign interface names based on underlying PCI device order on KVM;
*) cloud - ignore "force-update" command if DDNS is disabled;
*) cloud - improved DDNS service disabling;
*) crs3xx - fixed possible memory leak when disabling bridge interface;
*) crs3xx - improved data transmission between 10G and 1G ports;
*) dhcp - properly load DHCP configuration if options are configured;
*) dhcpv4-server - fixed service becoming unresponsive after interface leaves and enters the same bridge;
*) dhcpv6-server - recreate DHCPv6 server binding if it is no longer within prefix pool when rebinding/renewing;
*) discovery - properly use Sytem ID for "software-id" value on CHR;
*) e-mail - added info log message when e-mail is sent successfully;
*) ethernet - fixed IPv6 packet forwarding on IPQ4018 devices;
*) ethernet - fixed IPv6 packet forwarding on IPQ4018 devices;
*) ike2 - added option to specify certificate chain;
*) ike2 - fixed local address lookup when initiating new connection;
*) ike2 - improved subsequent phase 2 initialization when no childs exist;
*) ipsec - added account log message when user is successfully authenticated;
*) ipsec - allow multiple peers to the same address with different local-address (introduced in v6.43);
*) ipsec - fixed stability issues after changing peer configuration (introduced in v6.43);
*) ipsec - improved invalid policy handling when a valid policy is uninstalled;
*) kidcontrol - added "reset-counters" command for "device" menu (CLI only);
*) kidcontrol - added "tur-fri", "tur-mon", "tur-sat", "tur-sun", "tur-thu", "tur-tue", "tur-wed" parameters (CLI only);
*) kidcontrol - dynamically discover devices from DNS activity;
*) kidcontrol - fixed validation checks for time intervals;
*) led - added "dark-mode" functionality for wsAP ac lite, RB951Ui-2nD, hAP and hAP ac lite devices;
*) lte - added additional ID support for Novatel USB730L modem;
*) lte - added "cell-monitor" command for R11e-LTE international modem (CLI only);
*) lte - added support for JioFi JMR1040 modem;
*) lte - fixed DHCP relay packet forwarding when in passthrough mode;
*) lte - fixed Jaton/SQN modems preventing router from booting properly;
*) ntp - fixed possible NTP server stuck in "started" state;
*) proxy - removed port list size limit;
*) rb3011 - implemented multiple engine IPsec hardware acceleration support;
*) romon - improved packet processing when MTU in path is lower than 1500;
*) romon - improved reliability when processing RoMON packets on CHR;
*) routerboard - show "boot-os" option only on devices that have such feature;
*) snmp - fixed w60g station table;
*) snmp - report bridge ifSpeed as "0";
*) ssh - fixed single command execution (introduced in v6.44beta9);
*) switch - fixed ACL rules on IPQ4018 devices;
*) traffic-flow - fixed post NAT port reporting;
*) w60g - added "frequency-list" setting;
*) w60g - added interface stats;
*) w60g - fixed interface LED status update on connection;
*) w60g - renamed "mcs" to "tx-mcs" and "phy-rate" to "tx-phy-rate";
*) winbox - added 4th chain selection for "HT TX chains" and "HT RX chains" under "CAPsMAN/CAP Interface/Wireless" tab;
*) winbox - added "radio-name" setting to "CAPsMAN/CAP Interface/General" tab;
*) winbox - added "secondary-channel" setting to "CAPsMAN/CAP Interface/Channel" tab;
*) winbox - allow setting "network-mode" to "auto" under LTE interface settings;
*) wireless - improved stability for 802.11ac;

Download the new 'RouterOS 6.44beta17' version here: https://www.mikrotik.com/download



0 Коментара


Recommended Comments

Няма коментари.

Създайте нов акаунт или се впишете, за да коментирате

За да коментирате, трябва да имате регистрация

Създайте акаунт

Присъединете се към нашата общност. Регистрацията става бързо!

Регистрация на нов акаунт

Вход

Имате акаунт? Впишете се оттук.

Вписване
×

Important Information

By using this site, you agree to our Terms of Use.