Jump to content
  • публикации
    7340
  • коментара
    3
  • преглеждания
    201600

Contributors to this blog

  • Влади 19

RouterOS 6.42.11 [Long-term]


Гост

1187 прегледа

6.42.11 changelog:

MAJOR CHANGES IN v6.42.11:
----------------------
!) telnet - do not allow to set "tracefile" parameter;
----------------------

*) capsman - fixed "group-key-update" parameter not using correct units;
*) certificate - properly flush old CRLs when changing store location;
*) console - properly remove system note after configuration reset;
*) dhcpv6-server - properly handle DHCP requests that include prefix hint;
*) discovery - fixed malformed neighbor information for routers that has incomplete IPv6 configuration;
*) discovery - fixed neighbor discovery for PPP interfaces;
*) export - fixed "silent-boot" compact export;
*) gps - added "coordinate-format" parameter;
*) interface - improved system stability when including/excluding a list to itself;
*) kidcontrol - do not allow users with "read" policy to pause and resume kids;
*) led - fixed default LED configuration for RBMetalG-52SHPacn;
*) log - properly handle long echo messages;
*) lte - added support for more ZTE MF90 modems;
*) lte - disallow setting LTE interface as passthrough target;
*) package - use bundled package by default if standalone packages are installed as well;
*) resource - fixed "total-memory" reporting on ARM devices;
*) snmp - added "tx-ccq" ("mtxrWlStatTxCCQ") and "rx-ccq" ("mtxrWlStatRxCCQ") values;
*) snmp - do not initialise interface traps on bootup if they are not enabled;
*) switch - fixed MAC learning when disabling interfaces on devices with Atheros8327 and QCA8337 switch chips;
*) system - fixed situation when all configuration was not properly loaded on bootup;
*) timezone - fixed "Europe/Dublin" time zone;
*) upgrade - automatically uninstall standalone package if already installed in bundle;
*) webfig - do not show bogus VHT field in wireless interface advanced mode;
*) winbox - allow to change VHT rates when 5ghz-n/ac band is used;
*) winbox - renamed "Radius" to "RADIUS";
*) winbox - show "Switch" menu on RB4011iGS+5HacQ2HnD and RB4011iGS+;
*) wireless - added new "installation" parameter to specify router's location;
*) wireless - improved stability for 802.11ac;
*) wireless - improvements in wireless frequency selection;

Download the new 'RouterOS 6.42.11' version here: https://www.mikrotik.com/download

0 Коментара


Recommended Comments

Няма коментари.

Създайте нов акаунт или се впишете, за да коментирате

За да коментирате, трябва да имате регистрация

Създайте акаунт

Присъединете се към нашата общност. Регистрацията става бързо!

Регистрация на нов акаунт

Вход

Имате акаунт? Впишете се оттук.

Вписване
×
×
  • Създай нов...

Important Information

By using this site, you agree to our Terms of Use.