Jump to content
  • entries
  • comments
  • views

Contributors to this blog

  • Влади 19

RouterOS 6.42rc9 [Release candidate]



6.42rc9 changelog:

*) bridge - fixed interface list moving in "/interface bridge port" menu;
*) bridge - fixed hw-offload disabling for Mediatek and Realtek switches when STP/RSTP configured;
*) bridge - fixed hw-offload disabling when adding a port with "horizon" set;
*) bridge - fixed repetitive port "priority" set;
*) bridge - fixed situation when packet could be sent with local MAC as dst-mac;
*) crs1xx/2xx - added BPDU value for "ingress-vlan-translation" menu "protocol" option;
*) crs3xx - hide deprecated VLAN related settings in "/interface ethernet switch port" menu;
*) dhcpv4-server - fixed framed and classless route received from RADIUS server;
*) dhcpv6-client - added info exchange support;
*) dhcpv6-client - added support for options 15 and 16;
*) dhcpv6-server - added DHCPv4 style user options;
*) ike1 - do not accept "mode-config" reply more than once;
*) ike2 - delay rekeyed peer outbound SA installation;
*) ipsec - properly update IPsec secret for IPIP/EoIP/GRE dynamic peer;
*) kidcontrol - added initial support for "/ip kid-control" feature (CLI only);
*) lte - do not add DHCP client on LTE modems that doesn't use DHCP;
*) lte - fixed DHCP client adding for MF823 modem;
*) mac-ping - fixed duplicate responses;
*) modem - added initial support for AC340U;
*) ppp - allow to override remote user PPP profile via "Mikrotik-Group";
*) ppp - changed default value of "route-distance" to 1;
*) quickset - show "G" flag for guest users;
*) radius - added warning if PPP authentication over RADIUS is enabled;
*) radius - increase allowed RADIUS server timeout to 60s;
*) snmp - allow also IPv6 on default public community;
*) snmp - fixed SNMP for W60G interfaces;
*) tile - improved stability in high throughput HW accelerated IPsec setups ("/system routerboard upgrade" required);
*) tr069-client - added "DownloadDiagnostics" and "UploadDiagnostics";
*) webfig - added support for proper default policies when adding script or scheduler job;
*) webfig - fixed bridge port sorting order by name;
*) winbox - added possibility to delete SMS from Inbox;
*) winbox - allow to open bridge host entry;
*) winbox - allow to specify "to-ports" for "action=masquerade";
*) winbox - do not show "hw" option on non-ethernet interfaces;
*) winbox - do not show VLAN related settings in switch port menu on CRS3xx boards;
*) winbox - fixed "/tool e-mail send" attachment behaviour;
*) winbox - improved stability when using trackpad scrolling in large lists;
*) wireless - fixed frequency-monitor/sniffer/snooper; (introduced in v6.42rc);
*) wireless - fixed nv2 (introduced in v6.42rc);
*) wireless - updated "Czech Republic" country 5.8 GHz frequency range;

Other changes since 6.41:

*) bridge - fixed bridge related settings conversation during upgrade from pre-v6.41 bridge implementation (introduced v6.41);
*) bridge - properly update "actual-mtu" after MTU value changes (introduced v6.41);
*) btest - fixed TCP test accuracy when low TX/RX rates are used;
*) capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
*) crs317 - improved transmit performance between 10G and 1G ports;
*) detnet - additional work on "detect-internet" implementation;
*) detnet - fixed "detect-internet" feature unavailability if router had too long identity (introduced v6.41);
*) dhcpv6-client - added possibility to specify options (CLI only);
*) discovery - fixed discovery related settings conversation during upgrade from pre-v6.41 discovery implementation (introduced v6.41);
*) dude - fixed e-mail notifications when default port is not used;
*) firewall - fixed "tls-host" firewall matcher (introduced v6.41);
*) firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
*) ike1 - display error message when peer requests "mode-config" when it is not configured;
*) ike1 - fixed "aes-ctr" and "aes-gcm" encryption algorithms (introduced v6.41);
*) ike2 - improve half-open connection handling;
*) interface - improved interface configuration responsiveness;
*) log - properly report bridge interface MAC address changes;
*) poe-out - do not show "poe-out-current" on devices which can not determine it;
*) rb1100ahx4 - fixed reset button responsiveness when regular firmware is used;
*) routerboot - fixed missing upgrade firmware for "ar7240" devices;
*) snmp - added w60g support;
*) ssh - improved key import error messages;
*) tile - added "aes-ctr" hardware acceleration support;
*) tile - fixed USB device speed detection after reboot;
*) tr069-client - fixed HTTPS authentication process;
*) traffic-flow - do not count single extra packet per each flow;
*) wireless - fixed nv2 protocol on ARM platform SXTsq devices;
*) wireless - improved wireless scan functionality for devices with multiple wireless interfaces;

Download the new 'RouterOS 6.42rc9' version here: https://www.mikrotik.com/download


Recommended Comments

There are no comments to display.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.