Jump to content
  • публикации
    7330
  • коментара
    2
  • преглеждания
    52233

Contributors to this blog

  • Влади 19

Относно този блог

Микротик Форум Блог

Публикации в този блог

 

RouterOS 6.43rc19 [Release candidate]

6.43rc19 changelog: *) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login);
*) bridge - fixed FastPath for bridge master interfaces (introduce in v6.42);
*) chr - fixed adding MSTI entries;
*) dhcpv6-client - added missing "Server identifier" parameter in release message;
*) kidcontrol - fixed dynamically created firewall rules order;
*) lte - added extended signal information for Quectel LTE EC25 and EP06 modem;
*) lte - added ICCID reading for info command R11e-LTE and R11e-LTE-US (CLI only);
*) user - all passwords are now hashed and encrypted, plaintext passwords are kept for downgrade (will be removed in later upgrades);
*) w60g - added distance measurement (CLI only);

Other changes since v6.42.3:

*) backup - do not encrypt backup file unless password is provided;
*) bridge - add dynamic CAP interface to tagged ports if "vlan-mode=use-tag" is enabled;
*) bridge - added ingress filtering options to bridge interface (CLI only);
*) bridge - added initial Q-in-Q support (CLI only);
*) bridge - allow to make changes for bridge port when it is interface list;
*) bridge - fixed bridge hw-offloading on MMIPS devices (introduced in v6.43rc10);
*) bridge - fixed dynamic VLAN table entries when using ingress filtering;
*) btest - requires at least v6.43 Bandwidth Test client when connecting to v6.43 or later version server except when authentication is not required;
*) capsman - allow to change "radio-name" (CLI only);
*) certificate - add "expires-after" parameter (CLI only);
*) chr - added checksum offload support for Hyper-V installations;
*) chr - added large send offload support for Hyper-V installations;
*) chr - added multiqueue support on Xen installations;
*) chr - added support for multiqueue feature on "virtio-net";
*) chr - added virtual Receive Side Scaling support for Hyper-V installations;
*) chr - do not show IRQ entries from removed devices;
*) chr - fixed NIC hotplug for "virtio-net";
*) chr - improved boot time for Hyper-V installations;
*) crs3xx - added initial Q-in-Q hardware offloading support (CLI only);
*) crs3xx - fixed ACL rate rules (introduced in v6.41rc27);
*) crs3xx - fixed packet forwarding on SFP+ interfaces (introduced in v6.43rc11);
*) crs3xx - fixed VLAN filtering when there is no tagged interface specified;
*) defconf - fixed missing bridge ports after configuration reset;
*) dhcpv4-server - do not allow override lease "always-broadcast" value based on offer type;
*) dhcpv4-server - fixed DHCP server functionality (introduced in v6.43rc);
*) dhcpv4-server - improved performance when "rate-limit" and/or "address-list" setting is present;
*) dhcpv6-server - added initial dynamic simple queue support;
*) filesystem - improved software crash handling on devices with FLASH type memory;
*) interface - improved reliability on dynamic interface handling;
*) ipsec - added "responder" parameter for "mode-config" to allow multiple initiator configurations (CLI only);
*) ipsec - added "src-address-list" parameter for "mode-config" that generates dynamic "src-nat" rule (CLI only);
*) ipsec - added warning messages for incorrect peer configuration;
*) ipsec - do not allow removal of "proposal" and "mode-config" entries that are in use;
*) ipsec - improved reliability on generated policy addition when IKEv1 or IKEv2 used;
*) ipsec - install all DNS server addresses provided by "mode-config" server;
*) ipsec - separate phase1 proposal configuration from peer menu (CLI only);
*) kidcontrol - allow to edit discovered devices;
*) led - fixed CCR1016-12S-1S+ LED behaviour after Netinstall (introduced in v6.41rc58);
*) led - improved w60g alignment trigger;
*) log - show interface name on OSPF "different MTU" info log messages;
*) lte - added extended LTE signal info for SIM7600 modules;
*) lte - added roaming status reading for info command (CLI only);
*) lte - added support for Novatel USB730LN modem with new ID;
*) lte - allow to execute concurrent internal AT commands;
*) lte - allow to use multiple PLS modems at the same time;
*) lte - do not allow to send "at-chat" commands for configless modems;
*) lte - expose GPS channel for PLS modems;
*) lte - fixed SIM7600 registration info;
*) lte - improved r11e-LTE and r11e-LTE-US dialling process;
*) lte - improved r11e-LTE configuration exchange process;
*) lte - improved reading of SMS message after entering running state;
*) lte - renamed LTE scan tool field "scan-code" to "mcc-mnc" (CLI only);
*) lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
*) lte - use alphanumeric operator format in info command;
*) mac-telnet - require at least v6.43 MAC Telnet client when connecting to v6.43 or later version server;
*) radius - use MS-CHAPv2 for "login" service authentication;
*) romon - require at least v6.43 RoMON agent when connecting to v6.43 or later RoMON client device;
*) routerboard - allow to fill up to half of the RAM memory with files on devices with FLASH storage;
*) routerboard - fixed "protected-routerboot" feature (introduced in v6.42);
*) smb - fixed valid request handling when additional options are used;
*) ssh - disconnect all active connections when router gets rebooted or turned off;
*) switch - added support for port isolation by switch chip (CLI only);
*) tr069-client - fixed setting of "DeviceInfo.ProvisioningCode" parameter;
*) w60g - added 4th 802.11ad channel (CLI only);
*) w60g - general stability and performance improvements;
*) w60g - improved maximal achievable distance;
*) w60g - removed distance lock for wAP 60G devices;
*) webfig - improved authentication process;
*) winbox - added bridge Fast Forward statistics counters;
*) winbox - fixed bridge port MAC learning parameter values;
*) winbox - improved authentication process excluding man-in-the-middle possibility (Winbox v3.14 required);
*) winbox - show "Switch" menu on hAP ac^2 devices;
*) winbox - show HT MCS tab when "5ghz-n/ac" band is used;
*) wireless - added option for RADUS "called-station-id" format selection (CLI only);
*) wireless - do not disconnect clients when WDS master connects with MAC address "00:00:00:00:00:00";
*) wireless - fixed wireless interface lockup after period of inactivity;
*) wireless - improved Nv2 stability for 802.11n interfaces on RB953, hAP ac and wAP ac devices;

Download the new 'RouterOS 6.43rc19' version here: https://www.mikrotik.com/download

Гост

Гост

 

RouterOS 6.0 released

Download the new RouterOS 6.0 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.0.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.0 changelog: *) ipsec - added /peer passive option which will prevent starting ISAKMP negotiation and signifies xauth responder/initiator side; *) RouterBOARD - default wireless config now includes password - serial number; *) lte - support YOTA WLTUBA-107; *) console - fixed crash when variable name was not specified for *) hotspot - added mac-cookie login method; http://wiki.mikrotik.com/wiki/Manual:Hotspot_Introduction#MAC_Cookie *) lcd - show a message when system shutdown is complete; *) lcd - added Log screen which is accessible through the Main Menu and shows log messages where action=echo; *) ipsec - added pre-shared-key-xauth and rsa-signature-hybrid authentication methods; *) increased max l2mtu on CCR to 10226 bytes; *) fixed crash on RB1200; *) fixed bonding - did not work after remove, undo; *) fixed queues - router could become unresponsive when configuring queues; Source

Влади

Влади

 

RouterOS 6.1 released

Download the new RouterOS 6.1 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.1.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.1 changelog: *) pptp, l2tp - fixed crash when tunnel mru was too big and fragmented ip packet was received; *) hotspot - fixed problem when after upgrade hotspot html directory was empty; *) ipv6 nd - dns dynamic-servers were not included in router advertisements; *) winbox - fixed problem Switch menu disappeared on RB2011; *) fixed memory amount issue on RB1100AHx2; *) console - '/import' prints each command that is executed; *) console - 'import' has new argument 'from-line' that starts executing commands after specified line; *) secure api - fixed problem when wrong client ip address was reported; *) hotspot - fixed universal client; *) api - added support for API over TLS (SSL); *) api - api service is now enabled by default; *) ppp - do not show R flag for locally authenticated users; *) vrrp - fixed ah authentication; *) webfig - added support for RADIUS authentication (via MS-CHAPv2); *) ipsec - for peers with full IP address specified system will autostart ISAKMP SA negotiation; *) trafficgen - added inject-pcap command for replaying pcap files into network; *) dns - retry queries with tcp if truncated results received; *) improved queue statistics updating; *) fix 1G linking with some Cisco devices (affects RB7xx, RB9xx, RB1100, RB2011, CCR); Source

Влади

Влади

 

RouterOS 6.2 released

Download the new RouterOS 6.2 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.2.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.2 changelog: *) console - added "on-error" argument to ':do' command that is executed if command raises error; *) hotspot - fixed chap error after failed http-chap login (broken in v6.1); *) console - added new ':return' command that interrupts execution of script and passes argument as return value if script was called as function; *) routerboot - fixed upgrade from RouterOS (could fail on some units); *) userman - fixed payment gateway response notify processing; *) console - resolved issue with 'from-pool' propery in '/ipv6 address'; *) console - array value syntax in expressions '{1;2;3;4}' now can specify values with word keys as '{a=1;b=2}'; *) console - added 'verbose' argument to '/import' command that enables line-by-line script import. By default import whole script at once and don't print it, as it was in version 6.0; *) console - ':global', ':local' and ':set' commands have new parameter 'do' that allows assigning block of commands to the variable; *) console - global variables now are common to all users and are available to all users with at least "read,write,test,policy" policy; *) console - fixed parameter passing to scripts. Script parameters can be accessed without declaring them with ':local' and ':global' commands. For backwards compatibility global variables are first looked up in script parametrs; *) console - '$var 1 2 a="a" b="b"' syntax for passing parameters to commands stored in a variable. Parameters are accessed as '$1' '$2' '$a' '$b'; *) ipsec - fixed peer address matching; *) ups - query smart ups capabilities before issuing any commands; *) improved CCR responsiveness on other interfaces when one interface is under attack; *) sms tool - added sim-pin setting; *) dhcp server - framed routes are now also added to the server routing table; *) dhcpv6 server - added binding-script option; *) proxy - allow multiple src-address for ipv4 and ipv6; *) eoip,gre tunnels could occasionally crash multicore router; *) fixed bug - sometimes some types of interfaces would stop working; *) ipsec sometimes could crash kernel on CCR; *) connection tracking sometimes could crash kernel on CCR; *) ppp,pptp,l2tp,sstp - added default-route-distance parameter; *) scep - "/cert scep ra" merged into "/cert scep client" without saving ra config; *) ipsec - fix phase1 autonegotiation on little endian platforms; *) pppoe server - allow service with empty service-name to accept all pppoe clients; *) lcd - current-screen option is replaced with "/lcd show" command *) lcd - current-interface option is replaced with "/lcd interface display" command *) graphing - make graphs stable on ppp & ovpn interfaces; *) www, hotspot - fixed problem when www service stopped responding on high load; *) winbox, webfig: allow to enter space in the text fields; *) webfig - fixed configuration of VPLS & routing filters; *) lcd - added option for enabling or disabling the touch screen; *) lcd - added options for screen switching; *) lcd - up to 10 non-physical interfaces can now be added to the lcd; *) lcd - all interface graph screen can now be customized from /lcd interface page; *) backup - changed default backup file name to --.backup for file browsers to sort them properly; *) webfig - it did not work in Opera; *) webfig - made terminal work again; *) winbox - added ability to fully set up traffic generator in winbox; *) trafficgen - allow ranges for ip addrs and udp ports; *) trafficgen - add tcp header support; *) queue simple - fixed bug - actual queue order sometimes was wrong; *) queue simple - queue is not invalid when at least one of target interfaces is up; *) fixed crash when setting master-port on AR8327 switch chips; *) fixed addresslist - dynamic entries sometimes would still show up even afther being timed out; *) added /ip settings allow-hw-fast-path setting to control AR8327N hardware ipv4 fast path; *) vrrp - allow more than one vrrp on interface; Source

Влади

Влади

 

RouterOS 6.3 released

Download the new RouterOS 6.3 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.3.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.3 changelog: *) ssh - fixed denial of service; *) traceroute - show mpls labels as well; *) bug fix - sometimes some new interfaces could not be created properly any more (f.e. some pppoe clients could not connect); *) console - added '/console clear-history' command that clears command-line history for all users, requires 'policy' policy; *) sstp - limit packet queue for each device; *) RB2011L - fixed occasional gigabit switch-chip lockup; *) user manager - will warn on 1MB and stop before reaching minimum of 500KB disk space; *) hotspot - do not account traffic to local hotspot pages; *) ppp, hotspot - added ability to specify where to insert rate limiting queue, it's parent and type; *) pptp, l2tp, sstp - allow to specify server via dns name; *) dhcp - added ability to specify where to insert rate limiting queue; *) www proxy - support ipv6 parent proxy; *) webfig - fixed problem when opening quickset page country was automaticly changed to etsi; *) traceroute - added mtr like pinging; *) fix queues - correct queue was not installed when last child removed; *) fix simple queues - sometimes some simple queues would stop working after configuration changes; *) console - fixed issue with local variables having non-empty value before first assignment; *) console - fixed command ":global name" without second argument to not create or change global variable "name", only effect is to make "name" refer to global variable. *) console - fixed passing local variables as argument to function; *) RB1200 - fixed crash when receiving over l2mtu size packets on some ethernet interfaces; Source

Влади

Влади

 

RouterOS 5.26 released

Download the new RouterOS 5.26 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-5.26.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 5.26 changelog: *) ssh - fixed denial of service; Source

Влади

Влади

 

RouterOS 6.4 released

Download the new RouterOS 6.4 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.4.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.4 changelog: *) wireless - improved 802.11n wireless retransmission (doesn't effect nstreme/nv2) *) ovpn - allow to specify server via dns name; *) winbox - fixed problem where ipv6 routes with non local link address gateway could not be added; *) fixed watchdog on mipsle boards; *) traceroute - added count & max-hops parameters; *) traceroute - added back use-dns parameter; *) fixed usb Yota LTE modem hangup; *) console - make newly added item names always immediately available; *) graphing - make sure that interface graphs gets preserved across reboots; Source

Влади

Влади

 

RouterOS 6.5 released

Download the new RouterOS 6.5 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.5.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.5 changelog: *) tftp - added data packet pipelining for read requests; *) console - exported physical interface configuration uses 'default-name' instead of item number to match relevant interface; *) console - report all constituent errors for parameters with multiple alternative value types; *) certificates - merge '/certificate ca' into '/certificate', use set-ca-passphrase to maintain CA functionality; *) lcd - backlight option is replaced with "/lcd backlight" command *) dhcp server - added option to disable conflict-detection; *) console - ':return' does not trigger 'on-error=' action of ':do' command; *) route - fixed crash that could be triggered by change in nexthop address resolution; *) route - some imported VPNv4 routes were not using MPLS labels; *) route - imported VPNv4 routes were not always updated or removed when the original route changed; *) winbox - fixed problem where all settings were read only on first open; *) ovpn server - use only ciphers that are allowed not that client requested; *) ssh client - fixed public key authentication; *) ipsec - fix peer mathing with non byte aligned masks; *) fix routerboot upgrading if RouterOS is partitioned; *) add support for second serial port on CCR boards; *) fix serial port baudrate selection on CCR boards; *) ethernet interface stats that are behind switch chip show real hw stats instead of just the traffic that goes through cpu; Source

Влади

Влади

 

RouterOS 6.6 released

Download the new RouterOS 6.6 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.6.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.6 changelog: *) winbox - fixed problem where all previous session opened windows were read only; *) certificate - no more 'reset-certificate-cache' and 'decrypt' commands, private keys can be decrypted only on 'import', use 'decrypt' before upgrade if needed; *) fixed arp-reply only with more than one ip address on interface; *) fixed RB400 not to reboot by watchdog during micro-sd format; *) web proxy - fix SPDY server push handling; *) certificate - merged '/certificate ca issued', '/certificate scep client' and '/certificate templates' into '/certificate'; *) console - :foreach command can iterate over keys and values in an array, by specifying two counter variables, e.g.: :foreach k,v in=[/system clock get] do={:put "$k is $v"}; *) added support for new Intel 10Gb ethernet cards (82599); *) certificates - fixed certificate import; *) wireless - fixed crash when dfs was enabled on pre-n wireless cards; *) fixed port flapping on CCR; Source

Влади

Влади

 

RouterOS 6.7 released

Download the new RouterOS 6.7 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.7.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.7 changelog: *) support Android usb tethering interface; *) ipsec - added aes-gcm icv16 encryption mode; *) wireless - improve rate selection for nstreme protocol *) poe - new poe controller firmware for RB750UP and OmniTIK UPA; *) ipsec - added aes-ctr encryption mode; *) leds - inverted modem signal trigger, now it will trigger when the signal level rises above the treshold; *) ipsec - added sha256 and sha512 support; *) ipsec - proposal defaults changed to aes-128 and sha1 for both phase1 and phase2; *) certificate - support ip, dns and email subject alternative names; *) dhcpv4 server - added REMOTE_ID option variable for relayed packets; *) ipsec - fix policy bypass on IPv6 gre, ipip, eoip tunnels when policy uses protocol filter; *) userman - fix crash on tilera; *) fixed hairpin nat on bridge with use-ip-firewall=yes; *) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address; *) address-list - allow manually adding timeoutable entries; *) address-list - show dynamic entry timeout; *) fixed l2mtu changing on CCRs - could cause port flapping; *) disabling/enabling ethernet ports did not work properly on CCRs - could cause port flapping; *) fixed port flapping on CCR - could happen when having other than only-hardware-queue interface queue. Note that having other interface queue than only-hardware-queue dramatically reduces performace, so should be avoided if possible; Source

Влади

Влади

 

RouterOS 6.8 released

Download the new RouterOS 6.8 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.8.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.8 changelog: *) bridge - default protocol-mode changed to RSTP for new bridges, fixed bridge mac address changing when port (with lowest mac address) goes down *) userman - improve startup time; *) sstp client - support server name verification from certificate; *) wireless - improved 11n and nv2 stability; *) dhcp client - support interfaces in bridge; *) dhcp - parse decimal strings and IP addreses in options value; *) bgp - don't show community 'internet' in BGP advertisements; *) ipsec - enable hardware acceleration for aes-cbc + md5|sha1|sha256 aead on tilera cpus; *) ospf - fixed checksum calculation for OSPFv3 AS-external-LSAs; *) default configuration - changed dhcp server lease time to 10 minutes; *) fixed port isolation on CRSs (bug introduced in v6.6); *) smb - added support for SMB 2.002 *) timezone information updated; *) ppp - fixed ppp bridging (did not work since v6.6); *) improved speed of PPP, PPPoE, PPTP & L2TP on multicore routers; *) address-list - fix crash when adding two identical address list entries (not allowed any more); *) fixed multicast forwarding on CCRs; *) firewall - improved address-type matcher, and added it for ipv6 aswell; Source

Влади

Влади

 

RouterOS 6.8 released

Download the new RouterOS 6.8 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.8.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.8 changelog: *) bridge - default protocol-mode changed to RSTP for new bridges, fixed bridge mac address changing when port (with lowest mac address) goes down *) userman - improve startup time; *) sstp client - support server name verification from certificate; *) wireless - improved 11n and nv2 stability; *) dhcp client - support interfaces in bridge; *) dhcp - parse decimal strings and IP addreses in options value; *) bgp - don't show community 'internet' in BGP advertisements; *) ipsec - enable hardware acceleration for aes-cbc + md5|sha1|sha256 aead on tilera cpus; *) ospf - fixed checksum calculation for OSPFv3 AS-external-LSAs; *) default configuration - changed dhcp server lease time to 10 minutes; *) fixed port isolation on CRSs (bug introduced in v6.6); *) smb - added support for SMB 2.002 *) timezone information updated; *) ppp - fixed ppp bridging (did not work since v6.6); *) improved speed of PPP, PPPoE, PPTP & L2TP on multicore routers; *) address-list - fix crash when adding two identical address list entries (not allowed any more); *) fixed multicast forwarding on CCRs; *) firewall - improved address-type matcher, and added it for ipv6 aswell; Source

Влади

Влади

 

RouterOS 6.9 released

Download the new RouterOS 6.9 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.9.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.9 changelog: *) lcd - added option to change the color-scheme; *) updated bootloader firmware; *) ppp: fixed RADIUS accounting; *) ppp: fixed IPV6-Prefix assigning; *) ppp: fixed dial-on-demand; Source

Влади

Влади

 

RouterOS 6.10 released

Download the new RouterOS 6.10 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.10.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.10 changelog: *) fix autosupout.rif generation after kernel panic; *) ovpn - make it work again; *) ovpn client - remove cipher=any & auth=any options, protocol does not support them; *) pptp - fixed where Windows & MacOS clients were disconnecting all the time; *) sstp - make it work with Windows client with AES encryption; *) ipv6 pool - fix dynamic prefix disappearing which may influence large VPNs with IPv6; *) ssh client - fix key agreement when sometimes wrong DH algorithm was selected; *) bgp - multipath eBGP now does not propagate BGP nexthop unless forced in configuration; *) removed 10/100 half duplex from autonegotiation advertisement on CCR; Source

Влади

Влади

 

RouterOS 6.11 released

Download the new RouterOS 6.11 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.11.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.11 changelog: *) ipsec - fix aes-cbc hardware acceleration on CCR with key sizes 192 and 256; *) wireless - add auto frequency feature; *) ovpn - fixed TLS renegotiation; *) ovpn - make bridge mode work with big packets (do not leave extraneous padding); *) ovpn - fixed require-client-certifcate; *) ppp - revert RADIUS NAS-Port behaviour, report tunnel interface id; *) ppp - mppe encryption together with mrru locked the router; *) dhcp - added support for DHCP option 138 - list of CAPWAP IPv4 servers; *) quickset - added Guest Network setup to Home AP mode; *) console - no longer required to supply value of '/routing bgp instance vrf' property 'instance' for 'add' command; *) ethernet - added option to enable rx/tx flow control (will be disabled by default); *) ethernet - added ability to specify advertised modes for copper ports; *) fixed 100% cpu usage on CCRs; *) ssl - not finding CRL in local store for any certificate in trust chain will cause connection to fail; *) lte - support for Huawei ME609 and ME909u-521; Source

Влади

Влади

 

RouterOS 6.12 released

Download the new RouterOS 6.12 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.12.torrent Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.12 changelog: *) l2tp - fixed "no buffer space available" problem; *) ipsec - support IPv4 over IPv6 and vice versa; *) pppoe - report correctly number of active links; *) updated timezone information; *) many fixes for CRS managed switch functionality - particularly improved VLAN support, port isolation, defaults; *) added trunk support for CRS switches; *) added policing support for CRS switches; *) www - added support for HTTP byte ranges; *) lte - provide signal strength using snmp and make 'info once' work in console; Source

Влади

Влади

 

RouterOS 6.13 released

<p>Download the new RouterOS 6.13 release over the torrent network: <a href="">http://www.mikrotik.com/download/routeros-ALL-6.13.torrent</a><br />Otherwise please visit <a href="http://www.mikrotik.com/download">http://www.mikrotik.com/download</a> to pick exact version!</p><p>6.13 changelog:<br /><br />*) console - comments are now accepted where new command can start, that is, where '/' or ':' characters can be used to start new command, e.g. /interface { # comment until the end of the line print }<br />*) backup - backups by default are encrypted now (with user password). To use backup on older versions, you should disable encryption with dont-encrypt flag when creating it;<br />*) files with '.sensitive.' in the filename require 'sensitive' permission to manipulate;<br />*) lcd - reduce CPU usage when displaying static screens;<br />*) l2tp - fixed occasional server lockup;<br />*) pptp - fixed memory leak;<br />*) sstp - fixed crashes;</p> <a href="http://www.mikrotik.com/download" class='bbc_url' rel='external'>Source</a>

Влади

Влади

 

RouterOS 6.14 released

<p>Download the new RouterOS 6.14 release over the torrent network: <a href="">http://www.mikrotik.com/download/routeros-ALL-6.14.torrent</a><br />Otherwise please visit <a href="http://www.mikrotik.com/download">http://www.mikrotik.com/download</a> to pick exact version!</p><p>6.14 changelog:<br /><br />*) sntp - 'mode' now is a read-only property, it is set to broadcast if no server ip address is specified;<br />*) smb - fixed some SMB1 errors;<br />*) wireless-fp package is now included in routeros one (disabled by default);<br />*) webfig - fixed quickset, it didn't work with disabled wireless pacakge;<br />*) sstp - fixed problem where session was closed every 2min;<br />*) pptp,l2tp,pppoe - fixed problem where some of the static bindings become dynamic interfaces;<br />*) eoip - lowered default MTU to avoid IP packet fragmentation;<br />*) eoip - added clamp-tcp-mss setting with default=yes for new tunnels to avoid IP packet fragmentation;<br />*) fixed - bridge could sometimes get added without "running" flag;<br />*) fixed - simple queues could sometimes crash router;<br />*) fixed - simple queue stats freeze (empty winbox queue window);<br />*) ssh server - allow none cipher;<br />*) proxy - added 'anonymous' option which will skip adding X-* and Via headers;<br />*) dhcp server - added option use-framed-as-classless and added support for DHCP-Classless-Static-Route RADIUS attribute;<br />*) quickset - fixed problem where address mode selection did not work in bridge mode;<br />*) ipv6 address - fixed problem where changing advertise lost ipv6 connected route;CAVEAT: CAPsMAN Layer3 doesn’t work if IPv6 package enabled either on CAPsMAN or CAP device;</p> <a href="http://www.mikrotik.com/download" class='bbc_url' rel='external'>Source</a>

Влади

Влади

 

RouterOS 6.15 released

<p>Download the new RouterOS 6.15 release over the torrent network: <a href="">http://www.mikrotik.com/download/routeros-ALL-6.15.torrent</a><br />Otherwise please visit <a href="http://www.mikrotik.com/download">http://www.mikrotik.com/download</a> to pick exact version!</p><p>6.15 changelog:<br /><br />*) fixed upgrade from v5 - on first boot all the optional packages were disabled;<br />*) fixed problem where sntp server could not be specified in winbox & webfig;<br />*) metarouter - make openwrt work on ppc metarouter again;</p> <a href="http://www.mikrotik.com/download" class='bbc_url' rel='external'>Source</a>

Влади

Влади

 

RouterOS 6.15 released

Download the new RouterOS 6.15 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.15.torrent
Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.15 changelog:

*) fixed upgrade from v5 - on first boot all the optional packages were disabled;
*) fixed problem where sntp server could not be specified in winbox & webfig;
*) metarouter - make openwrt work on ppc metarouter again;

Гост

Гост

 

RouterOS 6.15 released

Download the new RouterOS 6.15 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.15.torrent
Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.15 changelog:

*) fixed upgrade from v5 - on first boot all the optional packages were disabled;
*) fixed problem where sntp server could not be specified in winbox & webfig;
*) metarouter - make openwrt work on ppc metarouter again;

Гост

Гост

 

RouterOS 6.15 released

Download the new RouterOS 6.15 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.15.torrent
Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.15 changelog:

*) fixed upgrade from v5 - on first boot all the optional packages were disabled;
*) fixed problem where sntp server could not be specified in winbox & webfig;
*) metarouter - make openwrt work on ppc metarouter again;

Гост

Гост

 

RouterOS 6.15 released

Download the new RouterOS 6.15 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.15.torrent
Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.15 changelog:

*) fixed upgrade from v5 - on first boot all the optional packages were disabled;
*) fixed problem where sntp server could not be specified in winbox & webfig;
*) metarouter - make openwrt work on ppc metarouter again;

Гост

Гост

 

RouterOS 6.15 released

Download the new RouterOS 6.15 release over the torrent network: http://www.mikrotik.com/download/routeros-ALL-6.15.torrent
Otherwise please visit http://www.mikrotik.com/download to pick exact version! 6.15 changelog:

*) fixed upgrade from v5 - on first boot all the optional packages were disabled;
*) fixed problem where sntp server could not be specified in winbox & webfig;
*) metarouter - make openwrt work on ppc metarouter again;

Гост

Гост

×

Important Information

By using this site, you agree to our Terms of Use.